Cart 2 india

Specification
Brand : AREA 419
BulletPoint1 : The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today.
BulletPoint2 : They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber.
BulletPoint3 : “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck. It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.
BulletPoint4 : 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
BulletPoint5 : Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
BulletPoint6 : The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely.
BulletPoint7 : MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools!
CareInstructions : Dishwasher Safe
Color : Multicolor
ExternallyAssignedProductIdentifier : 7617150777244
ExternallyAssignedProductIdentifier1 : 0853675008570
ExternallyAssignedProductIdentifier2 : 853675008570
Hazmat : 3
IncludedComponents : Single funnel head
ItemForm : Cream
ItemName : Area 419 Interchangeable Funnel Heads (3" Drop Tube)
ItemPackageDimensions_Height : 25.9 centimeters
ItemPackageDimensions_Length : 9.4 centimeters
ItemPackageDimensions_Width : 18.8 centimeters
ItemPackageQuantity : 120
ItemTypeKeyword : funnels
Manufacturer : Area 419
Material : Aluminum
Material1 : Stainless Steel
Material2 : Polycarbonate
ModelNumber : 3" Drop Tube
NumberOfItems : 1
OperationMode : Manual
PartNumber : 419-FN-HEAD
ProductDescription : The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them). The do not rely on fitting over the body of the case to hold in place. They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber. This is huge for the super ultra magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).
ProductSiteLaunchDate : 2024-11-19T19:43:06.518Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52150000