Cart 2 india

Specification
Brand : Bussmann
BulletPoint1 : Electrical
BulletPoint2 : Manufacturer: Eaton Bussmann
BulletPoint3 : Country of manufacture: Mexico
BulletPoint4 : Designed to IEC 60127-2/3 (32mA-10A) & extensions:12.5A-15A
BulletPoint5 : Easy to install
Color : 1250a
ConnectorType : Screw
CurrentRating : 100 amps
ExternallyAssignedProductIdentifier : 8047286730438
ExternallyAssignedProductIdentifier1 : 051712147989
ExternallyAssignedProductIdentifier2 : 0051712147989
ExternallyAssignedProductIdentifier3 : 00051712147989
IncludedComponents : Unit^Instruction Guide
ItemName : Fuse Block,61 to 100A,T,1 Pole
ItemPackageDimensions_Height : 2.1 inches
ItemPackageDimensions_Length : 4.8 inches
ItemPackageDimensions_Width : 1.7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : fuse-blocks
Manufacturer : Eaton Bussmann
Material : Copper
MaximumCurrent : 60 amps
ModelNumber : T30100-1CR
MountingType : Pole Mount
NationalStockNumber : 5920-01-305-5716
NumberOfContacts : 1
NumberOfItems : 1
NumberOfPoles : 1
NumberOfPositions : 1
OperatingVoltage1 : 160 volts_of_alternating_current
OperatingVoltage2 : 300 volts_of_alternating_current
PackageLevel : unit
PartNumber : T30100-1CR
ProductDescription : Fuse
Fuse Accessories
→Basic parameters
→ Product overview: RS8 series semiconductor device protection fuses (hereinafter referred to as fast-acting fuses). This series of fast-acting fuses is suitable for AC 50HZ, rated AC voltage 250V-3000V, rated DC voltage 65V-2000V, and rated current 10A-16000A In the circuit, it is used as a complete set of rectifier diodes, thyristors and other semiconductor devices for short circuit and certain overload protection that does not allow overcurrent.
This series of fast-acting fuses is made of a variable cross-section melt made of pure silver sheets and is encapsulated in a fuse tube made of high-strength porcelain; the fuse tube is filled with chemically treated high-purity quartz sand as the arc extinguishing medium; the fuse link can be Indicator or striker. When the fuse is melted, the indicator/ striker will act immediately to show that the fuse has been blown (indicator) and push the micro switch ( striker ) to send out various signals or automatically switch circuits. This series of fast-acting fuses have the characteristics of large rated capacity, high breaking capacity, fast fusing speed, obvious current limiting characteristics, obvious indication, safety and reliability. This series of fuse links complies with the national standard GB/T13539.4 and the International Electrotechnical Commission standard IEC60269-4.
→Normal working conditions
1. The altitude of the installation site does not exceed 2000M;
2. The upper limit of the ambient air temperature shall not exceed +40°C, and the lower limit shall not be lower than -5°C. Under such conditions, condensation due to temperature changes is not allowed;
3. Installed in a medium with no explosion hazard, no gas sufficient to corrode metal and damage insulation, and no conductive dust;
4. The product can be installed vertically, horizontally or tilted, and there is no significant vibration or impact in the
ProductSiteLaunchDate : 2012-10-16T19:57:54.214Z
Size : One Size
SpecificationMet : UL
SpecificationMet1 : iso
SpecificationMet2 : UL
SpecificationMet3 : Iec
SpecificationMet4 : CSA
StreetDate : 2017-03-12T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39121600
Voltage : 125 volts