Cart 2 india

Specification
AgeRangeDescription : adult
Brand : DISIROU
BulletPoint1 : Material: steel, surface hardened to HRC58-62 °, nickel plated.
BulletPoint2 : Dimensions: approx. 75 x 25 x 32MM (L x W x H)
BulletPoint3 : Angular Precision 10 'On Readable
BulletPoint4 : Micro Adjustable 0 ° To 60 ° With Stop
BulletPoint5 : Nickel plated, rust parallelism and verticality precision grinding of each working face to 0.01mm.
Color : Kp30
ExternallyAssignedProductIdentifier : 7505700066255
ItemName : DISIROU Gauge Block Set, Setup Blocks, Adjustable Micro Angle Gauge Precision Sine Gauge Block 0-60 Degrees with Wrench for Grinder Milling Machine Measuring Tools for Router and Table Saw(KP30)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : gage-blocks
Manufacturer : DISIROU
ModelName : gfjhetyhetrgr
ModelNumber : gfjhetyhetrgr
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : gfjhetyhetrgr
ProductDescription : Specification:
It can be a cursor indicates stepless tilt adjustment angle, and then be secured with screws, used to create a variety of fixed angle processing, testing of workpieces.

Package included:

1 x Adjustable Angle Gauge Block
1 x wrench

Uses:

In the milling machine, planer, grinder, and drilling with adjustable angle on the knife, crossed or with other fixtures will be the workpiece after the workpiece clamping, such as processing slopes, drilling oblique and so on.

Use: , loosen the screw, pull the V-shaped block along the base of the guide wheel rotation, looking for the target angle. , the use of the principle of reading the cursor, the main scale on the index of 1 °, the cursor index of 10 '. The "0" line on the cursor is aligned with the "0" line on the main scale to indicate that the A measurement plane is parallel to the reference plane and the B reference plane is perpendicular to the reference plane.

When the cursor "0" line is on the right side of the main scale "0" line, the degree is read out with the cursor "0" line, and the score is read out with the scale of the right of the cursor "0" line (reading is the same as the vernier caliper) Degrees (°), minutes (') that A, B measuring surface counterclockwise turn the angle.

When the cursor "0" line is left at the left of the main scale "0" line, the degree is read out with the cursor "0", and the score is read out with the left scale of the cursor "0" line. Read out the degree (°), points (') said

A, B measuring the angle of the clockwise turn.

After the angle is adjusted to the target value, tighten the V-block to the base.

Main technical indicators:

(1) When the measuring surface A is parallel to the base surface and the measuring surface B is perpendicular to the datum plane, the "0&qu
ProductSiteLaunchDate : 2024-09-19T03:26:54.087Z
Size : Medium
UnitCount : 1
UnspscCode : 52140000