SpecificationAlarm : Audible
Brand : Professional Lab
BulletPoint : Professional Lab RA100 Radon Gas Test Kit 12 Pack
BulletPoint1 : Air temperature accuracy: 1°c
BulletPoint2 : Battery type: 4 x aaa batteries
BulletPoint3 : Co2 resolution (percent): 0.1
BulletPoint4 : Co accuracy: 10 ppm from 0 to 200 ppm; 5 percent from 201 to 4000 ppm
BulletPoint5 : Co resolution (ppm): 1
Color : No Color
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 5693671562042
ExternallyAssignedProductIdentifier1 : 683431991002
ExternallyAssignedProductIdentifier2 : 0683431991002
ExternallyAssignedProductIdentifier3 : 00053533604801
ExternallyAssignedProductIdentifier4 : 6438092224402
ExternallyAssignedProductIdentifier5 : 00815518023317
Hazmat : 3
IncludedComponents : Professional Lab RA100 Radon Gas Test Kit 12 Pack
ItemName : Professional Lab RA100 Radon Gas Test Kit 12 Pack
ItemPackageDimensions_Height : 3.81 centimeters
ItemPackageDimensions_Length : 15.24 centimeters
ItemPackageDimensions_Width : 20.32 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-gas-analyzers
Manufacturer : PROFESSIONAL LABORATORIES INC
Material : plastic
MinimumOperatingVoltage : 6 volts
ModelName : Professional Lab RA100 Radon Gas Test Kit 12 Pack
ModelNumber : Professional Lab
NumberOfItems : 1
OperatingHumidity : 95 percent
PackageLevel : unit
PartNumber : RA100
PowerSourceType : AC
ProductDescription :
About Ram-Pro In-Line Spark Plug Engine Tester.Quickly and easily diagnoses ignition/engine issues.
TO USE: with engine off, remove rubber boot from spark plug, & Simply connect the tester between the spark plug and the plug wire, if ignition spark is being sent to the cylinder, light in tester glows & mirrors the spark.
Testers light up and/or buzz to indicate testing result.
Brightness of the light indicates the quantity of the spark.
The pulses should be bright and consistent.
Make sure your wires have a good connection.
If the connection is good and the pulse doesn't change. Suspect a bad ignition coil.
TIP: If you're testing in bright lighting conditions and not getting the right result, try again in a less bright environment
Another thing to try is to use the tester on another engine that you know to be good (under similar lighting conditions), and compare that flash to the one on your vehicle.
Double ended tool offers a straight boot to cover all applications.
Well-crafted and made with great protection shield so no loose wires or worry for any electrical shocks.
Suitable for a broad range of household, industrial and commercial uses.
Benefits:
Universal fit for all 2- or 4-stroke, single or multi-cylinder gasoline engines
Immediately identifies a problem with spark or fuel
Takes about 30 seconds
Essential for trouble shooting all internal combustion engines
Replaceable bulb
Rust-resistant
Tester snaps on tightly so it will not fall off when engine starts
Great troubleshooting aid
Durably designed for a long service life
Saves time and money while also offering a safe secure way to identify spark
No more guessing about the spark of the engine - It takes all the guess work out of knowing if you’re getting power to your spark plug
No more shocks from holding a wire to the block
DIY Tool Approved!
ProductSiteLaunchDate : 2013-09-20T19:46:08.796Z
Size : One Size
StreetDate : 2017-03-15T00:00:01Z
Style : Tool
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 46191500