SpecificationAgeRangeDescription : adult
Alarm : NO
Brand : GODIYMODULES
BulletPoint1 : MQ-136 MQ136 Hydrogen Sulfide Gas Sensor Module H2S Gas Sensor Detector
BulletPoint2 : Input voltage: DC5V Power consumption (current): 150mA
BulletPoint3 : DO output: TTL digital 0 and 1 (0.1 and 5V)
BulletPoint4 : AO output: analog level signal
BulletPoint5 : TTL output high and low level. (Can be directly connected to microcontroller or relay module)
BulletPoint6 : Special reminder: after the sensor is energized, it needs to be warmed up for about 20S for the measured data to be stable, and it is normal for the sensor to be hot because there is an electric heating wire inside, and it is not normal if it is hot.
Color : RAD
ExternallyAssignedProductIdentifier : 7509113082352
Hazmat1 : LITHIUM ION BATTERIES PACKED WITH EQUIPMENT
Hazmat10 : CN_SmallLithiumIonBatteryWithEquipment
Hazmat11 : DE_SmallLithiumIonBatteryWithEquipment
Hazmat12 : EG_SmallLithiumIonBatteryWithEquipment
Hazmat13 : ES_SmallLithiumIonBatteryWithEquipment
Hazmat14 : FR_SmallLithiumIonBatteryWithEquipment
Hazmat15 : GB_SmallLithiumIonBatteryWithEquipment
Hazmat16 : IE_SmallLithiumIonBatteryWithEquipment
Hazmat17 : IN_SmallLithiumIonBatteryWithEquipment
Hazmat18 : IT_SmallLithiumIonBatteryWithEquipment
Hazmat19 : JP_SmallLithiumIonBatteryWithEquipment
Hazmat2 : UN3481
Hazmat20 : MX_SmallLithiumIonBatteryWithEquipment
Hazmat21 : NL_SmallLithiumIonBatteryWithEquipment
Hazmat22 : PL_SmallLithiumIonBatteryWithEquipment
Hazmat23 : SA_SmallLithiumIonBatteryWithEquipment
Hazmat24 : SE_SmallLithiumIonBatteryWithEquipment
Hazmat25 : SG_SmallLithiumIonBatteryWithEquipment
Hazmat26 : TR_SmallLithiumIonBatteryWithEquipment
Hazmat27 : US_SmallLithiumIonBatteryWithEquipment
Hazmat28 : ZA_SmallLithiumIonBatteryWithEquipment
Hazmat3 : II
Hazmat4 : 9
Hazmat5 : AE_SmallLithiumIonBatteryWithEquipment
Hazmat6 : AU_SmallLithiumIonBatteryWithEquipment
Hazmat7 : BE_SmallLithiumIonBatteryWithEquipment
Hazmat8 : BR_SmallLithiumIonBatteryWithEquipment
Hazmat9 : CA_SmallLithiumIonBatteryWithEquipment
IncludedComponents : 1PCS
ItemName : MQ-136 MQ136 Hydrogen Sulfide Gas Sensor Module H2S Gas Sensor Detector
ItemPackageDimensions_Height : 0.39 inches
ItemPackageDimensions_Length : 3.94 inches
ItemPackageDimensions_Width : 1.8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-gas-monitors-and-detectors
Manufacturer : GODIYMODULES
Material : Paper
ModelName : MQ136
ModelNumber : MQ136
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 412534879874654
PowerSourceType : Corded Electric
ProductDescription :
1、Using high-quality double-sided panel design, with power indication and TTL signal output indication;
2、With DO switch signal (TTL) output and AO analog signal output;
3、TTL output high and low level. (Can be directly connected to microcontroller or relay module)
4. Analog output voltage varies with concentration.
5, There is 1 screw hole for easy positioning;
6, Fast response recovery characteristics
Electrical performance:
Input voltage: DC5V Power consumption (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output: analog level signal
Special reminder: after the sensor is energized, it needs to be warmed up for about 20S for the measured data to be stable, and it is normal for the sensor to be hot because there is an electric heating wire inside, and it is not normal if it is hot.
Wiring mode:
1、VCC:connect to the positive pole of the power supply (5V)
2、GND:connect to the negative pole of the power supply
3、DO:TTL switch signal output
4、AO:Analog signal output
ProductSiteLaunchDate : 2025-05-04T14:14:19.922Z
Size : 3%FS
Style : Readable,
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 46171600