Cart 2 india

Specification
Brand : Rochester Gauges
BulletPoint : Corrosion Free Brass and Stainless Steel Construction. Suitable in marine applications for fuel or water tanks. 1 ½” Male Pipe Thread mounting. Length is measured between the bottom of the threads and the bottom of the float guide frame. Typically purchased at least ½” shorter than the “inside” depth of the fuel tank. Can be fitted with a SR size “TwinSite” dial for 240-30 or 0-90 ohm output to drive remote electric fuel level indicators.
BulletPoint1 : EQUIVALENT TO WILBUR CURTIS PART# WC-37396
BulletPoint2 : THIS IS THE EXACT FIT FOR WILBUR CURTIS WC-37396
BulletPoint3 : Mavrik OEM-equivalents -- your best choice for safety and reliability
BulletPoint4 : Why pay more for OEM? Save time and money with Mavrik OEM-equivalents
BulletPoint5 : This part is covered by manufacturer warranty
Color : AC
ExternallyAssignedProductIdentifier : 9403262929187
ExternallyAssignedProductIdentifier1 : 0840215208972
ExternallyAssignedProductIdentifier2 : 840215208972
ItemName : Rochester Gauge 8280 Series "Marine" Flat Dial Vertical Fuel or Water Level 20"
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-gauges
Manufacturer : Rochester Gauges
Material : glass
Material1 : Rubber
Material2 : Stainless Steel
Material3 : Brass
ModelName : IZFTAHTH
ModelNumber : IZFTAHTH
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 8280-01044
ProductDescription : The brass and stainless-steel construction of the 8200 Series spiral gauge makes it suitable for use in marine applications and in measuring levels of water, oil or fuel. They are also used in a variety of construction and maintenance vehicles such as road sweepers and water spray trucks. Incorporates a strong nickel-plated Alnico magnet. The magnet is capable of driving a TwinSite sender (not included) that sends an electrical signal to a remote receiver and provides a direct, fractional reading. The model 8280 spiral gauge is equipped with a standard top reading fractional dial. Gauges have a 1 1/2" MNPT tank connection (2" adapter available), and are suitable for tank pressures up to 25 PSIG . They are designed for top mounting in tanks up to 36" [914 mm] deep General Specifications* Accuracy depends upon proper gauge sizing. Direct read dials ±8%, TwinSite dials ±12%. Temperature Standard operating range is -40°F to 158°F, -40°C to 70°C. Humidity Exposed portion is fully suitable for marine applications. Shock: Suitable for marine applications. Vibration: Suitable for marine applications. Approval: Direct indicating gauge. Available UL listed for flammable liquids. Some models UL recognized for marine service. Materials of Construction* Head, Support Rod, & Center shaft: Brass. Tie Plate, Guide, & Bearing Pin: Stainless steel. Float Nitrile: rubber Drive Magnet: Plated alnico. Standard Dial: Polycarbonate, hermetically sealed. Length measurement is from bottom of threads to the bottom of float guide frame.
ProductSiteLaunchDate : 2017-02-16T08:00:00.000Z
Size : 5A
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25170000