Cart 2 india

Specification
Brand : uxcell
BulletPoint : This is double output shaft for NMRV40 Worm Gear Speed Reducer, the output shaft diameter is 18mm with 6mm keyway and M6 screw holes on both ends.
BulletPoint1 : Voltage: DC12V;No-Load Speed: 230rpm; Reduction rate: 1:17;Torque: 2Kg.cm(1.7in.lb).
BulletPoint2 : Output Shaft Diameter: 8mm D-type, Output Shaft Length: 15mm.
BulletPoint3 : Total Size(not include shaft):40*36*125mm/1.57*1.57*1.41*4.92inch.
BulletPoint4 : Application: Worm Gear Motor With Encoder And Cable, widely used for intelligence appliance, robots, Rocker arm camera, and Electric paper cutter.
BulletPoint5 : Shaft rotation direction can be changed by changing the positive and negative wiring.
ItemName : uxcell DC 12V 230RPM 2Kg.cm Self-Locking Worm Gear Motor with Encoder and Cable, High Torque Speed Reduction Motor
ItemPackageDimensions_Height : 18 centimeters
ItemPackageDimensions_Length : 5.7 centimeters
ItemPackageDimensions_Width : 11.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : mechanical-gearboxes
Manufacturer : uxcell
Material : Steel
MeasurementSystem : Imperial
MetalType : Alloy Steel
ModelNumber : NMRV40
NumberOfItems : 1
PartNumber : a17092900ux0363
ProductDescription : Description
DC 12V 230RPM 2Kg.cm Self-Locking Worm Gear Motor With Encoder And Cable, High Torque Speed Reduction Motor

Specification:

Voltage: DC12V
No-Load Speed: 230rpm
Reduction rate: 1:17
Torque: 2Kg.cm
Error: ±10%
Wire Length: 20cm / 7.87inch
Output Shaft Diameter: 8mm / 0.31inch D-type
Output Shaft Length: 15mm / 0.59inch
Total Size(not include shaft):40*36*125mm / 1.57*1.41*4.92inch


Wirings:
Notice:
1. The yellow and green wires are the speed signal output line, and they can't be connected any power supply, or it will be burnt.
2. Positive and negative power supply of encoder do not allow connect wrong;voltage is 3.3-5V.
3. Control CW or CCW of motor by changing the positive and negative power supply of encoder (change Red Wire and White Wire connect)


Red Wire - positive power supply of motor(+)
White Wire - negative power supply of motor(-)
Black Wire - negative power supply of encoder(-) (positive and negative power supply of encoder do not allow connect wrong;voltage is3.3-5V)
Blue Wire - positive power supply of encoder(+) (positive and negative power supply of encoder do not allow connect wrong;voltage is 3.3-5V)
Yellow Wire - signal feedback (11 signals per motor turns a circle)
Green Wire - signal feedback (11 signals per motor turns a circle)


Package Include:
1 x motor , 1 x 6-Wire Connector

ProductSiteLaunchDate : 2017-12-07T08:16:42.368Z
Size : 12V 230RPM
Speed : 230 volts
Style : Double Output Shaft
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 12 volts