Cart 2 india

Specification
AgeRangeDescription : Kid
Brand : Hot Racing
BulletPoint : Axial Pinion Gear 32P 13T Steel 5mm Motor Shaft, AXIC0839
BulletPoint1 : Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers
BulletPoint2 : All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required
BulletPoint3 : ● GOOD REPLACEMENT: bevel gear set can be used as upgrade accessory to improve the strength of the model car, which compatible with A xial S C X 10 II 90047 90046 model car, also compatible for Axial AR44 axles.
BulletPoint4 : ● FINE WORKMANSHIP: With this Bevel Gear Set, you can replace the old accessory and improve the control performance of your model car.
BulletPoint5 : ● GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails as soon.
Color : As Picture Shown
CountryAsLabeled : TW
CpsiaCautionaryStatement : no_warning_applicable
EducationalObjective : Color Recognition
ExternallyAssignedProductIdentifier : 5052127013925
ExternallyAssignedProductIdentifier1 : 083745633030
ExternallyAssignedProductIdentifier2 : 0083745633030
ExternallyAssignedProductIdentifier3 : 0816874011314
ExternallyAssignedProductIdentifier4 : 08168740113144
GpsrSafetyAttestation : 1
IncludedComponents : Pinion Gear 32P 13T Steel 5mm Motor Shaft
IsAssemblyRequired : 1
ItemDisplayDimensions_Height : 0.5 inches
ItemDisplayDimensions_Length : 4.5 inches
ItemDisplayDimensions_Width : 4 inches
ItemDisplayWeight : 2 pounds
ItemName : Hot Racing NSG823 23t Steel 48p Pinion Gear 5mm or 1/8
ItemPackageDimensions_Height : 0.25 inches
ItemPackageDimensions_Length : 3.99 inches
ItemPackageDimensions_Width : 3.99 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hobby-rc-vehicle-transmissions-gears
Manufacturer : Hot Racing
ManufacturerMaximumAge : 6
ManufacturerMinimumAge : 14
Material : Plastic
ModelName : NSG823
ModelNumber : AXIC0839
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfLithiumIonCells : 1
NumberOfPlayers : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : NSG823
PowerSourceType : Manual
ProductDescription : This is the 23 Tooth 48P Optional Steel Pinion Gear for 5mm shaft

FEATURES:

CNC Steel Gear then Nitride to increased wear resistance, improved fatigue life, and enhanced corrosion resistant Black Steel base construction with 4mm set screw
Longer Base surface for maximum contact
YOU WILL RECEIVE:

One pinion gear
One set screw 4x4mm
One 5mm to 1/8 conversion Sleeve
REQUIREMENTS:

2mm hex wrench to install the set screw
SPECIFICATIONS:

length: 14mm
48 Pitch 23 tooth

description revised by: WP June 10, 2014
ProductSiteLaunchDate : 2016-11-18T14:50:21.826Z
SafetyWarning : Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
Size : Small
StreetDate : 2018-07-07T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : boys
TargetAudienceKeyword1 : Unisex Adult
TargetAudienceKeyword2 : Unisex Children
TargetAudienceKeyword3 : Men
TargetGender : unisex
Theme : Industrial
UnspscCode : 31161500