Cart 2 india

Specification
Brand : Consfly
BulletPoint1 : PID Program Control: The thermostatic heating dry bath incubator can be up to 5 temperature points and thermostatic heating time setting and continuous operation, and has the function of temperature deviation correction.
BulletPoint2 : LCD Display: The digital display shows the temperature and time information in real time, which is convenient for you to grasp the work process at all times.
BulletPoint3 : Temperature Control and Timing: The laboratory dry bath incubator has a temperature control range of RT+5~100°C and a timer range of 1~99h5min.
BulletPoint4 : Heating Module: The heating module of the dry bath incubator is thermally conductive aluminum, which is not easy to deform at high temperature. Moreover, you can replace the module with different sizes to meet the usage requirements.
BulletPoint5 : Porous Heat Dissipation: The mini dry bath incubator has multiple heat dissipation holes, which effectively avoids experimental failure due to overheating of the instrument.
BulletPoint6 : Application: The digital dry bath incubator can be used for the preservation of test samples, preservation and reaction of various enzymes, denaturation treatment of nucleic acids and proteins, PCR reaction and so on.
IncludedComponents : dry bath incubator
ItemName : Consfly Mini Dry Bath Incubator, Laboratory Digital Display Thermostatic Heating Dry Bath Incubator, Temperature Control and Timing Function & 5 Operation Modes (12X5ML)
ItemTypeKeyword : science-lab-general-purpose-incubators
Manufacturer : Consfly
ModelNumber : AHQ-MYY-22
NumberOfItems : 1
PartNumber : AHJQ-MYY-22
ProductDescription :
Specification:
Temperature control range: RT+5~100℃
Time setting range: 1~99h5min
Temperature fluctuation: ≤±0.5°C
Module temperature uniformity: ≤±0.5℃
Temperature control accuracy: ≤±0.3℃
Temperature display precision: ±0.1℃
Maximum power ：30W
Power supply :12V/5A
Package list: Dry Bath Incubator Body, Power Cord, 15x2ml Metal Heating Module, Transparent Warming Lid

Usage method:
1. Button
PROG: Programming button
SEG: Program segment selection button
TEMP: Target temperature adjustment button
TIME: Timing adjustment button
START/STOP: Work/ Stop button
2. Digital Display
SEG: P1-P5: program segment execution; S1-S5: program segment setting
TEMP: current temperature & target temperature
TIME: current program segment has been working time & current program segment target working time
3.Operation Method:
After power on, press the button of SEG column to select the program segment to be changed (S1-S5), then press the button of TEMP column to adjust the target temperature, which is displayed in the second row of the second column; press the button of the TIME column to set the running time. After setting one program segment, then press the SEG column button to select the next program segment, and set the target temperature and time according to the above steps, and complete the setting of 5 program segments in turn.
After completing the setting of 5 segments, press the PROG button, the screen prompts “Program flow work: S1 to S1”, the second “S1” number flashes, and then press the SEG button to select the interval of the program segment to be run(e.g. “S1 to S5”, it means that the dry bath incubator will automatically run according to the setting temperature and time corresponding to the temperature and time from S1 to S5). Next, press PROG button again to determine the working interval. Finally, press START/STOP button, the red light will be on to indicate that the device starts to work.
ProductSiteLaunchDate : 2024-07-29T08:46:19.098Z
Size : 12X5ML
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41000000