Cart 2 india

Specification
Brand : DIYCNIM
BulletPoint1 :
BulletPoint10 : 3M Roloc attachment system offers quick and easy change-outs for multi-step finishing processes
BulletPoint11 : Scotch-Brite material resists loading and wears at a uniform rate to provide continuous cutting action
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
BulletPoint6 : Aluminum oxide is durable and cuts fast
BulletPoint7 : Dense construction provides aggressive cut on harder metals
BulletPoint8 : Durable, aggressive wheel with high concentration of abrasive mineral is fast cutting and consistently produces a bright finish throughout the life of the wheel
BulletPoint9 : Flexible, non-woven construction provides controlled abrasive action that helps prevent undercutting or gouging, reducing steps in the finishing process
Color : Yellow
CompatibleDevices : Angle Grinder, Bench Grinder, Die Grinder
ConstructionType : Metal
ConstructionType1 : Coated
ConstructionType2 : Non-Woven
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 5272003744754
ExternallyAssignedProductIdentifier2 : 50051131074106
GpsrSafetyAttestation : 1
IncludedComponents : 1 Pair* Sand Milling Sheets
IndustryStandardIdentifier : 16
ItemName : 2pcs #150 General Milling Disc,Grain Grinder Mill Sheet,Electric Grain Milling Machine Disc Accessories for Grinding Slurry Wet&Dry,Model 150 Sand Milling Sheets
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : abrasive-grinding-discs
Manufacturer : WonDoHua
Material : 16 Grit
MaximumRotationalSpeed : 6000 rpm
ModelName : #150 General Milling Disc
ModelNumber : 07410
NumberOfItems : 1
PartNumber : WDOHUA-25-US
ProductDescription :

How to Install

1. Open the front cover of the machine(not included), remove the grinding disc, and then loosen the screws(not included) that fix the grinding sheets and take them out.

2. Reinstall the new grinding sheets back to the original grinding sheets position and lock the screws(not included), but please do not lock them first. Then, observe the gap between the inner circle of the grinding sheets and the mounting step, and adjust the gap to ensure uniformity. 

3. Concentric with the motor shaft and then tighten the screws(not included).

How to Adjust

1. Put the moving grinding disc back into the grinding chamber, adjust the screw, turn it counterclockwise, then cover the front cover and lock it.

2. Start the motor and tighten the adjusting screw clockwise until the grinding piece rubs a sharp sound. Turn off the switch after the motor idles for two minutes.

3. Open the front cover, take out the product, observe the friction marks of the moving grinding piece and the static grinding piece tooth groove, and touch the grinding piece around the hand. If the friction marks on the grinding piece are evenly distributed, and the heat difference of the grinding piece is not obvious. This means that the grinding plate is installed in balance and can be used without adjustment.

Specification

Material: Vajra Sand

Color: White

Applicable Model: #150 General

Assembly Required: Yes

Mount Type: Grinding Machine

Number of Pieces: 2

Net Weight: 1kg/2.2 lbs

Gross Weight: 0.9kg/1.98 lbs

Product Diameter: 14.6cm/5.75in

Diameter of the Largest Hole: 6.2cm/2.44inch

Product Thickness: 2.1cm/0.83in

Package Size: 15*15*6cm/5.91*5.91*2.36in

Package Included

1 Pair* Sand Milling Sheets

ProductSiteLaunchDate : 2023-10-26T03:52:55.651Z
Size : 4" x 1-1/4"
Style : Hard Bond
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 3
UnspscCode : 31191600