Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Mounted Point: Head diameter: 13mm / 0.51" (spherical diameter is about 1mm-1.5mm smaller than the head diameter.); shank diameter: 6mm / 0.24"; grits: 600 (fine grit); head shape: spherical, concave (the concave arc is smaller than a semicircle.).
BulletPoint2 : Wide Applications: Suitable for polishing jade, amber, stone, beeswax, glass etc. Specially used for forming and grinding spherical bead. Produce clean and accurate spherical beads in minutes with little or no chipping.
BulletPoint3 : Easy to Use: Can be used on bench drills, hand drills (not included here). The recommended speed is 2000-3000 rpm/min, for general purpose grinding in wide ranges of applications.
BulletPoint4 : Features: Electroplated diamond has high hardness and good wear resistance. Chamfered round shank provides easier clamping and stable working process.
BulletPoint5 : Tips: Always use lubricant (water or cutting fluid) to cool the workpiece when the grinding bit is working. Low drill pressure and increased use of water lubrication will extend the life of mounted point.
ItemName : uxcell Diamond Grinding Mounted Point, 13mm 600 Fine Grits Spherical Concave Head Bead Coarse Grinding Bit for Jade Amber Stone Beeswax Glass
ItemPackageDimensions_Height : 19.8 centimeters
ItemPackageDimensions_Length : 1.9 centimeters
ItemPackageDimensions_Width : 17.2 centimeters
ItemTypeKeyword : abrasive-grinding-mounted-points
Manufacturer : uxcell
ModelNumber : a22042500ux0269
PartNumber : a22042500ux0269
ProductDescription : Specifications:
Head Diameter: 13mm / 0.51" (spherical diameter is about 1mm-1.5mm smaller than the head diameter.)
Shank Diameter: 6mm / 0.24"
Shank Length: 22mm / 0.87"
Overall Length: 50mm / 1.97"
Grits: 600 (fine grit)
Head Shape: Spherical, Concave (the concave arc is smaller than a semicircle.)
Material: Diamond, Carbon Steel
Package Included: 1pcs x Diamond Mounted Point

Descriptions:Electroplated diamond has high hardness and good wear resistance. Chamfered round shank provides easier clamping and stable working process.
Suitable for polishing jade, amber, stone, beeswax, glass etc. Specially used for forming and grinding spherical bead. Produce clean and accurate spherical beads in minutes with little or no chipping.
Always use lubricant (water or cutting fluid) to cool the workpiece when the grinding bit is working. Low drill pressure and increased use of water lubrication will extend the life of mounted point.
Can be used on bench drills, hand drills (not included here). The recommended speed is 2000-3000 rpm/min, for general purpose grinding in wide ranges of applications.
Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

ProductSiteLaunchDate : 2022-06-20T06:40:37.725Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31191600