Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint : (2) Harting 09200100321 Enclosure Connector/Conn
BulletPoint1 : PCB terminals are widely used in almost all electronic equipment, especially in the circuit board or the PCB, the prototype and more. Acting as a connector role between power and signal.
BulletPoint2 : The insulation voltage is AC300V, the rated current is 12A, with 2 positions, suitable for the 5mm pitch board and AWG 26-14 wire. Package comes with 20 pack PCB terminal block.
BulletPoint3 : The terminal pins are made of brass tinned material, with good electrical conductivity. Side of the each PCB connector is produced with the spliced slot, good for adding positions. Besides, the simple structure makes the small space occupation and easy usage.
BulletPoint4 : Insert the pin to the board, then jointing to connect. When wiring is needed, peel off your wire first, then unscrew out of the screw to release the wiring hole, insert the wire into the hole, finally fasten the screws to tightly hold.
BulletPoint5 : The wiring sequence should be confirmed in advance, or it is very easy to connect incorrectly.
Color : Multicolored
ExternallyAssignedProductIdentifier1 : 0712358000396
ExternallyAssignedProductIdentifier2 : 712358000396
ItemName : MECCANIXITY PCB Screw Terminal Steel Plated Zinc Contact AC300V 12A 2P 5mm Pitch for Prototype Board Green Pack of 20
ItemPackageDimensions_Height : 8.2 centimeters
ItemPackageDimensions_Length : 3.3 centimeters
ItemPackageDimensions_Width : 8.2 centimeters
ItemTypeKeyword : ground-circuit-terminal-blocks
Manufacturer : MECCANIXITY
Material : Brass
PartNumber : mea210520ee0032
ProductDescription : What is this?
PCB terminals are widely used in almost all electronic equipment, especially in the circuit board or the PCB, the prototype and more. Acting as a connector role between power and signal.

What will I get?
The PCB Screw Terminals, we provide here, is in the size of: Insulation Voltage: AC300V; Rated Current: 12A; For Wire Gauge: AWG 26-14; Position: 2; Pitch: 5mm; Wiring Type: Lifting; Wiring Contact Material: Steel Plated Zinc; Terminal Material: Brass Tinned; Shell Material: Plastic; Color: Green; Terminal Length: 4mm; Body Size (Not Included Terminal): 10 x 8.1 x 10.1 mm / 0.39 x 0.32 x 0.4-inch(L*W*H)
In the package of: 20 x PCB Screw Terminals

Is there any advantages of the product?
GOOD MATERIAL - High conductivity brass tinned contacts terminal connectors with a durable moderate thickness plastic structure.
CAN BE SPLICED - Side of the each PCB connector is produced with the spliced slot, good for adding positions.
EASY FASTEN - With lifting type wiring hole, for use with screw to fasten, simple to hold the wire tightly.

How to use it?
Steps of installation: 1. Insert the pin to the board, then jointing to connect; 2. When wiring is needed, peel off your wire first; 3. Then unscrew out of the screw to release the wiring hole; 4. Insert your wire into the hole; 5.Finally, fasten the screws to tightly hold.

What should I notice?
The wiring sequence should be confirmed in advance, or it is very easy to connect incorrectly.
ProductSiteLaunchDate : 2021-08-20T09:34:15.195Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39121400
Voltage : 300 volts