Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
BatteryInstallationDeviceType : installed_in_vehicle
Brand : CNYST
BulletPoint1 : 1. Use the clamp method, 2-wire method, 3-wire method, 4-wire method, selection method and other measurement methods to measure earth resistance.
BulletPoint2 : 2. Equip with 2.5-inch color LCD screen, and also with USB and charge port, with storage function, clock function, automatic storage the test results 500groups which containing the date and time.
BulletPoint3 : 3. Support Android system Bluetooth communication function, after installing APP can test or read test records in mobile, bring new experience.
BulletPoint4 : 4.Earth Resistance Range:0.00Ω~200kΩ ,Soil Resistivity Range:0.00Ωm~9999kΩm,Earth Current Range:0.000mA~45A,Earth Voltage Range:0.0V~600.0V
BulletPoint5 : 5.Earth resistance measurement, loop resistance measurement, soil resistivity measurement, earth voltage measurement, grounding down lead leakage current and grounding fault judgement.
BulletPoint6 : The clamp contact surfaces must be kept clean, cannot rubbed with caustics and coarse material. Avoid any impact onto this tester, especially the clamp jaw contact surface. Confirm that the tester and accessories are in good condition, and the meter and test line insulation layer is not damaged, exposed or disconnected before use. During measurement, it is forbidden to touch bare conductors and the measuring circuit loop. Confirm that connector plug of line has been inserted in the tester interface closely. Please don’t supply over 100V AC or DC voltage between testing device and interface. Otherwise, the tester may damage.
BulletPoint7 : Clamp Meter Resistance Measurement Principle The basic principle of the clamp earth resistance tester measure earth resistance is measuring the loop resistance, as shown in the figure1. The clamp jaw part of the tester is comprised of voltage coil and current coil. The voltage coil provides excitation signal, and will induce a potential E on the measured loop. Under the effects of the potential E, the current I generate on the measured loop. The meter will measure E & I, and the measured resistance R can get by the following formula: R=E/I
BulletPoint8 : 3-wire method & 4-wire method Resistance measurement Principle The 3-wires and 4-wires method measures the grounding resistance value measurement by the rated current pole-changing method (suitable for accurate measurement of single-point grounding system), that is, the AC rated current I flows between the measuring object E grounding pole and the C (H) current pole, The potential difference V between the grounding pole of the E and the voltage of the P(S) voltage, and the grounding resistance value R is calculated according to the formula R=V/I.
Color : BLACK
ContainsBatteryOrCell : battery
IncludedComponents : see details
ItemName : CNYST Ground Pile Type Clamp Earth Resistance Meter Earth and Ground Resistance Testers with 2 3 4 Wire Method 2.5 Inch Colorful LCD Screen Earth Resistance Range 0.00Ω~200kΩ
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 35 centimeters
ItemPackageDimensions_Width : 26 centimeters
ItemTypeKeyword : ground-resistance-meters
Manufacturer : CNYST
Material : plastic
MeasurementAccuracy : see the description
ModelName : Fafeicye356kgonsh
ModelNumber : 02025011408
NumberOfItems : 1
NumberOfLithiumIonCells : 2
PartNumber : 02025011408
PowerSourceType : Battery Powered
ProductDescription : Product Function
Earth resistance measurement, loop resistance measurement, soil resistivity measurement, earth voltage measurement, grounding down lead leakage current and grounding fault judgement.

Product features
1. Use the clamp method, 2-wire method, 3-wire method, 4-wire method, selection method and other measurement methods to measure earth resistance.
2. Equip with 2.5-inch color LCD screen, and also with USB and charge port, with storage function, clock function, automatic storage the test results 500groups which containing the date and time.
3. Support Android system Bluetooth communication function, after installing APP can test or read test records in mobile, bring new experience.

Technical Specification
Earth Resistance Range :0.00Ω~200kΩ
Soil Resistivity Range: 0.00Ωm~9999kΩm
Earth Current Range :0.000mA~45A
Earth Voltage Range :0.0V~600.0V
Power Supply :DC 3.7V 2600mAh rechargeable lithium battery, full charge about 4.2V
Display Mode: 2.5 inch colorful LCD screen
Earth Resistance: Clamp method, 2-wire method, 3-wire method, 4-wire method, selection method
Test Frequency: 128Hz/111Hz/105Hz/94Hz(AFC automatic frequency selection)
Short-circuit Test Current :AC 10mA max
Open-circuit Test Voltage: AC 14V max
Electrode Spacing Range :1m~100m
Clamp Jaw Size: 65mmX32mm
Tester Dimension:307mm(L)X98mm(W)X56mm(H)
Tester Weight:Tester: about 1112g(include the battery); Total weight: about 5.1kg(include all accessories)
Auxiliary Ground Rod:4 PCS: Φ9mmX230mm
Test Line :4PCS: red 20m, black20m, yellow 10m, green 10m
Simple Test Line:2PCS: red 1.6m, black 1.6m
Measurement Times:Over 5000 times(short-circuit test, after one testing must stop 30s then can test again)
Line Voltage: Measurement below AC 600V
Data Storage :500groups
Audible & Visual Alarm: “Du—du—du” alarm sound
Automatic Shutdown: 5 minutes without any operation after starting up, the detector will shutdown automatically
Shift :Automatic
External Magnetic & Electric Field:＜40A/m; ＜1V/m
Resistance Measurement Frequency:>1KHz, 128Hz
Connection Interface:USB charge interface
Accessories :Tester:1PC; Test ring: 1PCS; USB charge cable: 1PCS; Charger Adaptor: 1PCS; Ground stake: 4PCS; Test line: 4PCS; Simple test line: 2PCS; Tool bag: 1PCS
ProductSiteLaunchDate : 2025-01-13T08:00:00.000Z
Size : M
Style : Ground Resistance Tester
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41113600