Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : INTBUYING
BulletPoint : Reads ground resistance down to 0.10 ω fully auto-ranging with data hold to capture readings
BulletPoint1 : This pendulum friction coefficient tester is a dynamic pendulum impact instrument.
BulletPoint2 : Good reliability, wide range of use, wide temperature operating environment, simple operation.
BulletPoint3 : Within the 6 month warranty, we could provide free replacement for all kinds of non-human damage parts.
BulletPoint4 : The number of times the pendulum is freely lowered from 5 degrees to the swing stop shall be no less than 70.
BulletPoint5 : It mainly used in construction, building materials, water conservancy, electric power, metallurgy, port, road and bridge, municipal and other capital construction projects
Color : Red and grey
ExternallyAssignedProductIdentifier1 : 783310082217
ExternallyAssignedProductIdentifier2 : 0783310082217
ExternallyAssignedProductIdentifier3 : 00783310082217
FitType : Universal
IncludedComponents : GROUND RESISTANCE TESTER (Case, Battery, Calibration Verification Loop)
ItemName : INTBUYING Portable Skid Resistance Tester Pendulum Friction Coefficient Measuring Instrument Pendulum Testing Tool
ItemPackageDimensions_Height : 4.8 inches
ItemPackageDimensions_Length : 15.2 inches
ItemPackageDimensions_Width : 11.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : ground-resistance-meters
Manufacturer : INTBUYING
Material : Stainless Steel
MeasurementAccuracy : 0.1mm
MeasurementType : Ohmmeter, Voltmeter
MinimumOperatingVoltage : 1.5 volts
ModelName : GROUND ROD TESTER
ModelNumber : CMGRT-100A
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CMGRT-100A
PowerSourceType : Corded Electric
ProductDescription : The skid resistance tester is used to determine friction coefficients of road surface, airport runway, marking paint, etc., and to determine the friction coefficients of typical road surfaces to provide a basis for various tire compounds. The tester is characterized by convenient checking, simple operation, less impact on traffic during measuring, more stable data, and usage in both indoor and outdoor circumstances.

Usage: Abrasion Tester
Rocking torque:615000g.mm
Pendulum mass:1500g(3.3lb)
Pendulum center distance:410mm (16.1inch)
Forward static pressure from rubber sheet to pavement:2263g(5lb)
Distance between rocking center to rubber sheet outer edge:508mm(20inch)
Net weight:14kg(30.9lb)

Features
1. Compact, easily transported & used in the field.
2. Can be used in remote locations, independent of any vehicle
3. Enclosed bearings & working parts for protection against wear
4. Heavy-duty frame construction
5. Adjustable feet on base

Structure:
1. Base: it is made up of T legs, leveling silk and leveling foam, which can adjust and support the instrument.
2. Pillar: It is composed of pillar, lifting mechanism, guiding rod and instrument handle, used for lifting and fixing the position of swing head.
3. Release switch: The switch installed on the cantilever is used to maintain the horizontal position of the swing rod and release the falling effect.
4. Steering system: including tightening handle, swing shaft, steering knuckle and bearing, connecting swing, fixed position to ensure free swing in the swing plane.
5. Indicator system: including pointer felt ring, press cover, pointer adjusting nut and dial, pointer can directly indicate the pendulum value.

Item Includes: One set of Portable Skid Resistance Tester (154003)

ProductSiteLaunchDate : 2019-12-27T08:00:00.000Z
Size : Tester with 300' Leads
SpecificationMet : Aemc
StreetDate : 2017-05-15T00:00:01Z
Style : Digital
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1