Specification Brand : LJIA BulletPoint1 : The AT527L features a fully automated, real-time, micro-desktop instrument controlled by a high-performance 32-bit ARM microprocessor. The instrument uses a 4.3-inch true color LCD display, which operates with full touch and a instrument interactive experience. BulletPoint2 : The instrument can test 0.0001mΩ~30Ω resistance, 0.00001~60.0000V DC voltage, maximum resistance of 33000 display digits, and maximum voltage of 600000 display digits. The AT527L combines high accuracy, high resolution and ultra-high speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 55 times per second. BulletPoint3 : The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay. BulletPoint4 : The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, self-contained database function and Excel export function, which can be effectively used for remote control and data acquisition and analysis. The instrument uses Amber Instruments to enhance the computer remote control instruction set, compatible with SCPI (Standard Command for Programmable Instrument programmable instrument standard command set) and Modbus BulletPoint5 : Test Current: ≥2A Color : One Color ExternallyAssignedProductIdentifier : 9454352983695 ItemName : Resistance Tester, AT527L AC Low ohm Meter (Battery Internal Resistance Meter),Accurately Measures ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 3 centimeters ItemPackageDimensions_Width : 2 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : ground-resistance-meters Manufacturer : LJIA Material : plastic ModelName : AT527L ModelNumber : AT527L NumberOfItems : 1 PartNumber : AT527L ProductDescription : Feature ● 33000 AC resistance readings, 6-bit DC voltage reading ● Resistance test range: 0.0001mΩ~3.3000kΩ ● Voltage test range: 0.00001V~400.000VDC ● 0.5% resistance accuracy ● 0.01% voltage accuracy ● HANDLER interface ● RS-232C and USB communication interface ● U disk real-time storage full touch operation Application ● Various contact resistance tests ● Determination of deterioration and life evaluation of alkaline batteries, lead storage batteries, and lithium batteries ● Battery factory inspection ● Super Capacitor Equivalent Resistance (ESR) Measurement
Specification Parameters AC resistance, DC voltage Accuracy Resistance: 0.5% Voltage: 0.01% Range Resistance:0.0001mΩ~3.3000kΩ Voltage:0.00001V~400.000VDC Signal Source 1kHz, frequency stability: 20ppm Range Use the 7 range test,3mΩ~3kΩ Speed The instrument is divided into four speeds: slow speed, medium speed, fast speed and high speed. Full channel open, and manual range mode: Slow speed: 3 times / sec Medium speed: 20 times / sec Fast: 40 times / sec High speed: 70 times / sec Result Display Direct reading, ΔABS, Δ%, θ, sorting result Display Max Resistance:33,000 Voltage:400,000 Adjustment Short-circuit reset for all range Comparator The instrument has a sorting function. RHI/RNG/RLO output. VHI/VNG/VLO output. Total NG/OK output Compare: Absolute Tolerance ±TOL Sort: The absolute deviation of measured value and nominal value is compared to the limits of each range. Percentage tolerance %TOL Sorting: The percentage deviation of the measured value and the nominal value is compared to the limits of each range. Sequential comparison sorting: the measured value is directly compared with upper and lower limits Trigger Internal, manual,external and remote Interface Handler interface (PLC),RS232C interface, USB iunterface Voltage: 195VAC ~ 245VAC Frequency: 50Hz Power: up to 15VA Outer dimensions ProductSiteLaunchDate : 2025-03-25T05:45:53.067Z Size : One Size UnitCount : 1 UnspscCode : 41113600