Cart 2 india

Specification
Brand : ArrogantF
BulletPoint1 : The boat trailer bunk fit for almost any boat bunk trailer, will definitely launching and loading boat on and off trailer quickly with minimal effort. Makes loading and unloading the boat on/off the ramp much easier!
BulletPoint2 : 2 pcs trailer bunk enders fit includes 2", 4" 6" trailer bunks.Boat weight limitation: 1,500 lbs for fiberglass boats, 4,000 lbs for metal boats
BulletPoint3 : Our bunk trailers for unpainted bottom boat pontoon boat, jon boats, jet ski, seadoo, waverunner, fishing boats. It's not recommened for painted bottom boat,because may scratch the bottom paint.
BulletPoint4 : Please note that our boat trailer berth does not have screws, which need to be purchased separately, please ensure that the screws fall into the sink area when installing to prevent scratching the hull. Do not release the boat from the trailer joint until it has retreated into the water. Since the tugboat berth is very smooth, your boat will slip on a steep boat launch
BulletPoint5 : If you have any questions about our plastic bunks for boat trailer, please contact us by order and we will solve the problem for you within 24 hours.
Color : Black
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 0818993011091
ExternallyAssignedProductIdentifier2 : 818993011091
FitType : Universal
ImportDesignation : Imported
IncludedComponents : 2 Bunkender
ItemName : ArrogantF 2 PCS Boat Trailer Glide Bunk Enders fit 4" or 6" Wide Trailer Bunks,use for Without Painted Bottom 1,500 lbs Fiberglass Boats or 4.000lbs Metal Boats,Pontoon Boats,Fishing Boats and More
ItemPackageDimensions_Height : 0.1 inches
ItemPackageDimensions_Length : 0.1 inches
ItemPackageDimensions_Width : 0.1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boat-trailer-guides-and-rollers
Manufacturer : ArrogantF
Material : Plastic
ModelName : Bunkender Trailer Pads
ModelNumber : Genericopiqz3xk78
NumberOfBoxes : 1
NumberOfHandles : 1
NumberOfItems : 1
NumberOfPockets : 3
NumberOfSections : 1
NumberOfWheels : 2
PartNumber : RP-444
Pattern : Solid
ProductDescription :

High quality boat trailer bunk slides are made by high-density polymer plastic to meet marine environment

Boat weight limitation:

Metal boats without painted bottom weighing up to 4000 pounds.

Fiberglass boats without painted bottom weighing less than 1500 pounds.

It’s not recommened for painted bottom boat,because may scratch the bottom paint.

Works on bunk trailers for unpainted bottom boat pontoon boat/jon boats/jet ski/seadoo/waverunner/fishing boats.

A must have for boat trilers:

The boat trailer bunk glides pads will definitely launching and loading boat on and off trailer with ease.    The slides pads decrease friction between hulls and bunks to makes launch and retrieve the boat on/off the ramp much easier!

No carpet on the bunks anymore and no jumping in& hard pushing off the trailer.

Package includes:

2pcs 3" x 10" Boat Trailer Bunk Enders(to protect the end of the bunks)

3-5 minutes slide on/off job done:

Just take the boat to the marina, then back the truck down to the water, release the cable holding the boat to the trailer slowly, finally boat slide down smoothly and into the water.

Warm Tips:

Don’t release the boat from the trailer hook before taking boat out of water.

Keep winch strap connected&locked boat from the trailer until it is in the water.   Otherwise boat may will slide off trailer.

The screw should be tighteded gently as over-tightening may damage the boat trailer bunk slick pads.

Make sure screws and screws heads should be below the surface of the pads and in the molded holes to prevent scratching of the hull

ProductSiteLaunchDate : 2024-04-08T03:37:26.025Z
ShellType : Hard
Size : 14.22cmx6.8cm
StrapType : Stretchable
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudience : Students, Professionals, and Parents
Theme : Contemporary
UnitCount : 1
UnspscCode : 49000000
WarrantyDescription : 1 Year
WaterResistanceLevel : water_repellent