Cart 2 india

Specification
Brand : Generic
BulletPoint : V Bend crossmember Boat Trailer
BulletPoint1 : Widely Application:This Boat Trailer V Bow Stop Can be adapted to most ships
BulletPoint2 : The Boat Trailer V Bow Stop size:2" Mounting Width, 3.8" V Span, 1/2" Mounting Hole Diameter
BulletPoint3 : High quality:Made from Polyurethane material,Resistant to rot and cutting,Protects your boat from collisions.
BulletPoint4 : Easy to Install:No additional tools are required for installation,that could save you valuable time and increase efficiency.
BulletPoint5 : This bow stop block is designed for long-lasting use on boat trailers,Boat Bow Stop makes boat to be snugged down on the trailer to prevent your boat from any direct collisions
Color : black
Department : mens
DrawerType : Side Mount
FinishType : Unfinished
ImportDesignation : Imported
IncludedComponents : 1)80-inch V-bend aluminum crossmember
ItemName : Generic Boat Trailer Aluminum Crossmember V-Bend Square Tube 3"" x 3"" x 80"", CMV80K
ItemPackageDimensions_Height : 14.9098 centimeters
ItemPackageDimensions_Length : 5.588 centimeters
ItemPackageDimensions_Width : 10.6934 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boat-trailer-guides-and-rollers
Manufacturer : Generic
Material : Rubber
ModelName : Vbend80crmem
ModelNumber : CMV80K
MountingType : Side Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : cm80v
Pattern : Solid
ProductDescription : This square tube V-Bend aluminum cross-member is common on aluminum I Beam boat trailers. The tube measures 3 inches tall x 3 inches wide x 80 inches long. While this is considered an industry standard 80 inch cross member, it measures 80" tip to tip. The tubing has a 1/4 inch wall thickness. Boat trailer cross members are normally attached using U-bolts and bolts. If you have an aluminum framed boat trailer that has galvanized cross-members this is a great upgrade to switch the whole trailer to aluminum. The Galvanized or Stainless Steel U-Bolt 1/2 inch x 3 inch x 4 5/16 inch is typically the go to U-Bolt for mounting this product to your I-Beam frame. This component has a 3" drop that is specifically intended to prevent impact from the V-Hull on your boat when loading and unloading at the ramp. This component is extremely important on your boat trailer as it is responsible for supporting the weight of your boat, and keeping the frame square Length could vary by 1/2"
ProductSiteLaunchDate : 2024-10-10T07:43:57.211Z
Size : 26 Bunk Slides + 4 Bunk Enders
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 24101805
WarrantyDescription : 1 Year Manufacturer