Cart 2 india

Specification
AutoPartPosition : rear
Brand : NOVINO
BulletPoint1 : A must have for boat trailers: The boat trailer bunk slides pads will definitely launching and loading boat on and off trailer quickly with minimal effort.Makes loading and unloading the boat on/off the ramp much easier!
BulletPoint2 : Fit for almost any bunk trailer,includes 2", 4" 6" trailer bunk slides.Boat weight limitation: 1,500 lbs for fiberglass boats, 4,000 lbs for metal boats
BulletPoint3 : Works on bunk trailers for unpainted bottom boat pontoon boat/jon boats/jet ski/seadoo/waverunner/fishing boats. It’s not recommened for painted bottom boat,because may scratch the bottom paint.
BulletPoint4 : Our boat trailer slides for bunk are with recessed screw holes for a firm mount. Just be make sure the screws drop into countersink area to prevent scratching the boat hull.
BulletPoint5 : Don’t release the boat from the trailer hookup until the boat backed into the water.Just remember unhook boat before taking boat out of water.Because the boat trailer bunk slicks pads are very slick and your boat will slide off on a steep boat launch. More warm tips pls see below information and instruction.
BulletPoint6 : Rubber pads on the heavy duty head are replaceable
Color : Black
CompatibleWithVehicleType : Boat
CompatibleWithVehicleType1 : Watercraft
CompatibleWithVehicleType2 : Trailer
CustomerPackageType : Standard Packaging
Department : mens
ExternallyAssignedProductIdentifier1 : 696728053727
ExternallyAssignedProductIdentifier2 : 0696728053727
ExternallyAssignedProductIdentifier3 : 0727908416565
ExternallyAssignedProductIdentifier4 : 0601759052458
FinishType : Galvanized
FitType : Universal Fit
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : C.H. Yates 8000 Black Rubber Heavy Duty 'V' Keel Roller - 8 in. x 0.625 in.
ItemDepth : 1.35 Inches
ItemDisplayDimensions_Height : 8.89 centimeters
ItemDisplayDimensions_Length : 17.78 centimeters
ItemDisplayDimensions_Width : 8.89 centimeters
ItemDisplayWeight : 34.08 ounces
ItemName : NOVINO 8PCS Boat Trailer Bunk Slides Pads and 2PCS Boat Trailer Slide Bunk Enders for Launching& Loading on/Off Easier, 3" x 10" Black Glides Slicks
ItemPackageDimensions_Height : 30.3022 centimeters
ItemPackageDimensions_Length : 10.2108 centimeters
ItemPackageDimensions_Width : 11.6078 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boat-trailer-guides-and-rollers
LegalComplianceCertifications : CARB Compliance Certificate
Manufacturer : NOVINO
Material : Polyurethane
ModelName : 8000
ModelNumber : 8000
ModelYear : 2007
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 10
PartNumber : 8000
Pattern : Solid
ProductDescription : High quality boat trailer bunk slides are made by high-density polymer plastic to meet marine environment

Boat weight limitation:
Metal boats without painted bottom weighing up to 4000 pounds
Fiberglass boats without painted bottom weighing less than 1500 pounds

It’s not recommened for painted bottom boat,because may scratch the bottom paint.

Works on bunk trailers for unpainted bottom boat pontoon boat/jon boats/jet ski/seadoo/waverunner/fishing boats.

A must have for boat trilers:
The boat trailer bunk glides pads will definitely launching and loading boat on and off trailer with ease. The slides pads decrease friction between hulls and bunks to makes launch and retrieve the boat on/off the ramp much easier!

No carpet on the bunks anymore and no jumping in& hard pushing off the trailer.

3-5 minutes slide on/off job done:
Just take the boat to the marina, then back the truck down to the water, release the cable holding the boat to the trailer slowly, finally boat slide down smoothly and into the water.

Package includes: 8pcs 3" x 10" Boat Trailer Bunk Slides Pads + 2pcs 3" x 10" Boat Trailer Bunk Enders(to protect the end of the bunks) + Stainless Steel Mounting Screws

Warm Tips:
Don’t release the boat from the trailer hook before taking boat out of water.
Keep winch strap connected&locked boat from the trailer until it is in the water.Otherwise boat may will slide off trailer.
The screw should be tighteded gently as over-tightening may damage the boat trailer bunk slick pads.
Make sure screws and screws heads should be below the surface of the pads and in the molded holes to prevent scratching of the hull

ProductSiteLaunchDate : 2023-04-14T10:16:59.750Z
RequiredProductComplianceCertificate : California Air Review Board (CARB)
Size : Kit 1: 8 Pads (3"x10") + 2 Bunk Enders
SpecificUsesForProduct : Rear Bumbers
StreetDate : 2010-03-18T00:00:01Z
Style : 8 Pads (3"x10") + 2 Bunk Enders
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 10
UnspscCode : 49000000
WarrantyDescription : 2