Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : Ramp-N-Clamp
BulletPoint1 : This is the Sport Model - Long Handle - The Sport model is designed specifically for fiberglass boats or most aluminum boats that have a bow eye that is directly mounted into the boat without a mounting plate. It will come with a 2 piece handle. The long handle is an automatic reset handle.
BulletPoint2 : Stainless Steel NON Corrosive - Upgraded Stolts Polyurethane Protector - Comes with a small Roller on the front to prevent the bow tip from catching when launching - Built in poly washer on the mouting plate for a smooth pivoting rotation - Clamp travels past the polyurethane to prevent steel on steel wear to your bow eye when latching and traveling - Low profile design to prevent boat and trailer displacement after install
BulletPoint3 : Installation of the Boat2Trailer automatic boat latch is very simple. This boat latch is designed to be a bow roller replacement, therefore it is a one bolt installation. You can simply remove your bow roller from your boat trailer and install our Ramp N Clamp Boat2Trailer automatic boat latch in its place. The installation takes roughly 10 minutes. Be sure to use roughly 22 - 26 ft lbs pressure on the insall bolt (snug). This way your latch can still pivot when needed at steeper landings.
BulletPoint4 : MADE IN USA - Our Boat2Trailer Latch by Ramp N Clamp is manufactured here in the U.S.A. The automatic boat latch by Ramp N Clamp has been collaboratively engineered at Skeeter, Ranger and Mastercraft boats and in production in the United States since 2012.
BulletPoint5 : What it does - The automatic boat latch allows you to load a boat by your self in seconds. You simply drive your boat up the trailer. Once the eye of the boat comes in contact with the clamp device, it will lock onto the eye and lock your boat to the trailer. You then exit the boat and pull to the dry waters edge to hookup your safety chain and strap for travel. It's that easy. Boat2Trailer dot com has many helpful videos as well.
Color : Red
CompatibleWithVehicleType : Personal Watercraft
Coverage : Boat Trailer Guide Pole
CustomerPackageType : Cardboard Box
ExteriorFinish : Silver
ExternallyAssignedProductIdentifier1 : 638828585258
ExternallyAssignedProductIdentifier2 : 0638828585258
ExternallyAssignedProductIdentifier3 : 00814166022345
FabricType : UV FADE PROOF 600 Denier Canvas
FinishType : Galvanized and Zinc Plated
FishingLineType : Braided
FishingTechnique : Trolling
FitType : Universal Fit
GpsrSafetyAttestation : 1
HandOrientation : Ambidextrous
IncludedComponents : C.H. Yates 5203-4P Black Rubber Spool Roller - 5 in. x 0.5 in.
InstallationType : Adhesive
ItemDepth : 8 inches
ItemDisplayDimensions_Length : 48 inches
ItemDisplayDimensions_Width : 2.5 inches
ItemDisplayWeight : 15.75 pounds
ItemName : Ramp-N-Clamp Boat2Trailer Sport Model Long Handle Automatic Boat Latch
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 8 inches
ItemPackageQuantity : 2
ItemShape : Oval
ItemTypeKeyword : boat-trailer-guides-and-rollers
Manufacturer : Boat2Trailer
Material : Stainless Steel
Material1 : Stainless Steel
Material2 : Aluminum
ModelName : Boat2Trailer Sport Model Long Handle
ModelNumber : RNCSport-Long
MountingType : Crossmember Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : L634502-NAVY
Pattern : Solid
PileHeight : 0.236 inches
ProductDescription : The Boat2Trailer Sport Model replaces a boat roller on a boat trailer. The Sport model is designed specifically for fiberglass boats or most aluminum boats that have a bow eye that is directly mounted into the boat without a mounting plate. Their can not be any mounting plate above the eye. If you have a mounting plate above the eye (typically ALUMINUM Lund and alumacraft boats) you must look up our Model L. If you have an aluminum thick eye you must look up our Model T. (see visual of models and bow eyes in the product images above). This is the LONG HANDLE version. It will come with a 2 piece handle. The long handle is an automatic reset handle. HOW TO USE: The RNC Automatic boat latch on Boat2Trailer is a NON corrosive fully stainless steel clamping system. It has a 1 inch thick Stoltz Polyurethane protector to give your boat the best protection. The Ramp N Clamp boat loading and boat launching system is a fast 1 bolt installation and very easy to use. Load a boat by yourself in seconds with the Boat2Trailer Latch. Back your trailer into the water. Then exit the vehicle, walk down to the doc and enter the boat. Now simply drive your boat into the trailer just above idle speed. Once you reach the Boat2Trailer Latch clamp it will automatically lock onto the eye of your boat. Once locked, you may shut down and raise the motor of your boat. Exit the boat to the dock. Now walk up to and enter the vehicle. Drive your boat and trailer forward to the dry waters edge. Now exit the vehicle and hookup your strap for safe travel. That's it. To release, undo your strap and chain, back down to the water and when you are ready, simply pull the lever to release. The automatic boat latch on Boat2Trailer Installs between a 3" - 4 1/2" roller bracket (universal). It is a direct replacement for a roller or bumper on a trailer. You remove the current roller on your trailer and replace it with the Ramp N Clamp automatic boat loading system on Boat2Trailer. It's a 1 bolt install.
ProductSiteLaunchDate : 2023-06-23T15:31:42.422Z
RequiredProductComplianceCertificate : California Air Review Board (CARB)
Size : 2 3/8" x 48"
Style : Extreme Max 3005.3825 Side Mount Roller Guide-On System for Boat Trailer
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UltravioletLightProtection : UV Protection
UnitCount : 8
UnspscCode : 25111900
WarrantyDescription : 2-year warranty
WaterResistanceLevel : waterproof