Cart 2 india

Specification
Brand : Sturdy Built
BulletPoint1 : The Included U Bolts fit around a 3 inch wide by 3 inch tall cross member. The U Bolts measure 1/2" in diameter, 3" wide, by 4 5/16" long.
BulletPoint2 : This Swivel Top style bunk bracket is the industry standard 10" height with slotted holes for multiple height adjustments
BulletPoint3 : The Adjustable Swivel Top Brackets in this kit are larger than your typical swivel top brackets in order to match the Heavy Duty Brackets that they mount to. However these tops still swivel just the same, allowing you to contour your bunk boards perfectly to the shape of your boats hull; whether angled or flat.
BulletPoint4 : [ Installation ] Directly bolt-on. If you have no previous installation experience, we sincerely recommend that you choose professional installation.
BulletPoint5 : [ Package List ] 2* Boat Trailer Guide, including installation accessories and instructions.
Color : Silver
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 0724901313532
ExternallyAssignedProductIdentifier2 : 724901313532
FitType : Universal
ImportDesignation : Imported
IncludedComponents : 2* Boat Trailer Guide, installation accessories and instructions.
ItemDepth : 10 inches
ItemName : Sturdy Built Boat Trailer V-Guide On Bow Support Kit for Front Crossmember
ItemPackageDimensions_Height : 3.35 inches
ItemPackageDimensions_Length : 7.88 inches
ItemPackageDimensions_Width : 6.3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boat-trailer-guides-and-rollers
Manufacturer : Sturdy Built
Material : Zinc Plated
ModelName : BL2397
ModelNumber : 8fdd482f-ccd0-43a6-b7a5-8be67ca36d9a
PartNumber : 24697
Pattern : Solid
ProductDescription : This hot dipped galvanized boat trailer V-guide on will help guide the bow of your boat to center up on your trailer. Made out of 1/8 galvanized steel, sleeved with 2 pvc and caps, this v-guide will save you time when loading your boat on your trailer. Rough width from Tip to Tip is 42 inches. The V guide will attach to your trailers cross-members by using a 2" galvanized hat bracket and two 1/2 x 3" x 4 5/16" galvanized U-bolts that are included in this kit. This Kit is specifically designed to mount on a 3" x 3" front cross member. This mounts on the front beam to support and lift the bow of the boat right before it would make contact with the winch post. As this is typically the point where a boat would go left or right in difficult situations, having additional guiding is ideal to make the loading process easier. 
ProductSiteLaunchDate : 2019-02-01T22:23:39.038Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 4
UnspscCode : 24101600
WarrantyDescription : No