Cart 2 india

Specification
Brand : EGW
BulletPoint : Ammo Chamber Checker .40 S&W 7-hole
BulletPoint1 : 223 REMINGTON: Used to check headspace of 223 Remington and 6mm x 45
BulletPoint2 : RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed.
BulletPoint3 : GO: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo.
BulletPoint4 : NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO Gauge, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD Gauge. The NO-GO Gauge is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace
BulletPoint5 : FIELD: FIELD Gauges are slightly shorter than the SAAMI maximum in order to give a small safety margin. If a rifle closes on a FIELD Gauge, its chamber is dangerously close to, or longer than, SAAMI-specified maximum chamber size. If chamber headspace is excessive, the gun should be taken out of service until it has been inspected and repaired by a competent gunsmith.
Caliber : 0.177
Color : Navy Blue
CrossSectionShape : Round
CustomerPackageType : Standard Packaging
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 841370107667
ExternallyAssignedProductIdentifier2 : 0841370107667
ExternallyAssignedProductIdentifier3 : 00734307903824
GpsrSafetyAttestation : 1
ImportDesignation : Made in the USA or Imported
IncludedComponents1 : Feed Die
IncludedComponents2 : Large feed fingers
ItemDisplayWeight : 3 ounces
ItemName : EGW Ammo Chamber Checker .40 S&W 7-Hole
ItemPackageDimensions_Height : 10.16 centimeters
ItemPackageDimensions_Length : 3.556 centimeters
ItemPackageDimensions_Width : 8.636 centimeters
ItemPackageQuantity : 1
ItemShape : Round Nose
ItemTypeKeyword : gunsmithing-tools-and-accessories
Manufacturer : EGW Inc.
ModelName : 90891
ModelNumber : LP90382
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfRounds : 7
PartNumber : 70130
Pattern : Solid
ProductDescription : Egw's chamber checkers are machined from solid 6061 t6 aircraft grade aluminum. While some companies use boring bars to make chamber checkers, egw uses the actual clymer reamers that are used to chamber barrels. Anodized matte black for durability. Measures min case diameter. Measures max overall length.
ProductSiteLaunchDate : 2014-04-26T17:12:20.878Z
SportType : Hunting
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 49131606