Cart 2 india

Specification
Brand : L.E. Wilson
BulletPoint1 : L.E. Wilson Inc. a family owned and operated business since 1927. And the first to produce the Case Gage in 1935
BulletPoint2 : The "Wilson Case Gage" A one piece gage that will check overall length and indicate min/max case length
BulletPoint3 : Measures min/max Headspace. Does not measure body diameters
BulletPoint4 : This gage is intended to be used with fired cases to determine a basis for full length sizing and case trimming
BulletPoint5 : Made in the U.S.A
Color : Polished Steel
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 857949005081
ExternallyAssignedProductIdentifier2 : 0857949005081
ExternallyAssignedProductIdentifier3 : 00857949005081
ExternallyAssignedProductIdentifier4 : 00076683999108
GpsrSafetyAttestation : 1
ItemDisplayWeight : 0.15 pounds
ItemName : L.E. Wilson CG-308W Winchester Case Gage
ItemPackageDimensions_Height : 5.08 centimeters
ItemPackageDimensions_Length : 10.668 centimeters
ItemPackageDimensions_Width : 5.08 centimeters
ItemPackageQuantity : 1
ItemShape : One Piece Cylindrical Gage
ItemTypeKeyword : gunsmithing-tools-and-accessories
Manufacturer : L.E. Wilson Inc.
Material : Polished Steel
ModelNumber : CG-308W
NumberOfItems : 1
PartNumber : CG-308W
ProductDescription :

Burstfire - Ultimate Primer Pocket Reamer Set

• First of all, if you've used these tools in the past, you know the struggle of dull cutters. We manufactured these with the highest quality material to ensure long term performance. You will appreciate the clean cuts / performance from our tools!
• *** Hate reaming / swaging? Burstfire Ultimate Small Primer Pocket Reamer is the easiest, fastest, and most effective solution on the market!
• We redesigned and improved vs others on the market. Normal reamers cut at 35-40 degree angle, which will require excessive metal to be cut for the crimp to be removed. Our reamer cuts at 80-85 degree angle, to SAAMI dimensions, and requires minimal cutting. A quick “tap and go” is all you need! A little goes a long way. Check out this video!

 

Burstfire - Primer Pocket Uniformer Set

• Like everything Burstfire, our Pocket uniformed is improved over rest on the market!
• So what’s diff? All pocket uniformer in the market are made way too small. Result is it creates a circular wobble when attempting to “uniform” the pocket. Which results in more effort/time to cut and uniform the pocket, evenly.
• our is made to the correct dimension, cutting the primer pockets at the correctly dimensions in both width and depth, effectively removing that wobble effect, and just enough that it does not remove any metal on the pocket wall.
• Purpose: Uniform uneven primer pockets, to ensure reliable primer ignition, and/or to prevent the possibility of slam-fire from primer not being seated deep enough.
• Another use case is to remove the protruding flash hole, caused by using incorrect decapping pin on smaller or undersized flash holes, causing flash hole to be punched outwards, and deformed.
• Industry standard 8/32 thread can be attached to any prep tool handle, or atop a Case Prep Center.

ProductSiteLaunchDate : 2014-09-30T15:36:52.552Z
ShipsGlobally : 1
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 27110000