Cart 2 india

Specification
AgeRangeDescription : adult
Brand : DIYElectronic
BulletPoint : DC 12V 24V Magnetic Control Switch Relay Module Hall Sensor Module Alarm
BulletPoint1 : Motor type: AC Motor
BulletPoint2 : Certification: NONE
BulletPoint3 : Origin: US(Origin)
BulletPoint4 : Model number: A1304ELHL A1304ELH A1304EL A1304E 1304 A1304LHLX 1304ELHLX 1304ELHL 30
BulletPoint5 : compact size and a light weight as well, easy to install, and can be put into use quickly.
Color : 1500mm Square Wave
ExternallyAssignedProductIdentifier : 7361424107328
ExternallyAssignedProductIdentifier1 : 0710594822109
ExternallyAssignedProductIdentifier2 : 710594822109
ItemName : DC 12V 24V Magnetic Control Switch Relay Module Hall Sensor Module Alarm
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-hall-effect-sensors
Manufacturer : DIYElectronic
Material : Copper
ModelName : RWRAPS
ModelNumber : RWRAPS
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : DIYELJHmo_1762
ProductDescription :
DC 12V 24V Magnetic Control Switch Relay Module Hall Sensor Module Alarm
1>.
Descriptions:
It is a 24V magnetic control relay module.It is mainly used for magnetic control detection,with its own relay,which can be directly connected to AC high-power products.
2>.Feature:
1.It uses a Hall sensor and has its own relay to directly control the load.
2.It uses wide voltage LM393 comparator.
3.It has 4 fixing bolt holes for easy installation.
4.It is widely used and can be used in many different scenarios.
3>.Parameter:
1.Product Name:24V Magnetic Control Relay Module
2.Working Voltage:DC 6V~24V
3.Output Load:AC 220V 10A/DC 30V 10A
4.Current:200mA(Min)
5.Work Temperature:-25℃~85℃
6.Work Humidity:5%~95%RH
7.Size:60*44*15mm
4>.
Notes:
1.The Hall sensor needs to be used in conjunction with a magnet.When a certain magnetic force is sensed,the relay is closed,and the common end is connected to the normally open end.When no magnetic force is sensed,the relay is disconnected,and the common end is connected to the normally closed end.
2.If the sensing distance between the Hall sensor and the magnet is within 5mm,it will be insensitive or there will be no triggering.
3.Common,normally open and normally closed three ports are equivalent to a dual control switch.When the relay coil is energized,the common terminal and the normally open terminal are connected;when there is no power,the common terminal and the normally closed terminal are connected;it will be in a conducting state,The relay is closed,when there is no magnetic force,it is in an off state.
5>.Package:
1.1pcs 24V Magnetic Control Relay Module
2.1pcs Positioning small board
3.1pcs 20cm 2P-Wire

ProductSiteLaunchDate : 2021-09-15T18:06:33.018Z
Size : One Size
Style : Modern
UnitCount : 1