Cart 2 india

Specification
AgeRangeDescription : adult
Brand : ZIZEV
BulletPoint : Inductors
BulletPoint1 : 5 Pcs Set: The set contains 5 pcs Hall effect sensors, with a wide power supply voltage of DC5V to 30V, ensures wider applications.
BulletPoint2 : NPN Normally Open: The Hall switch sensor is NPN normally open type, the sensing distance is 10mm, practical and useful.
BulletPoint3 : Hall Effect Generation: When the magnetic wooden plaque is close, Hall effect will be generated, and the switch signal will be output after amplification.
BulletPoint4 : Multi Purposes: Hall sensor is applicable to the position measurement of pneumatic, hydraulic, cylinder and piston, and can also be used as limit switch.
BulletPoint5 : Metal Usage: Compared with inductive sensor, Hall sensor can be installed in metal, side by side, and can pass through metal for detection.
Color : Dc 0-200a
CurrentRating : 200 amps
ExternallyAssignedProductIdentifier : 7650054903968
IncludedComponents : No
ItemName : Hall Proximity , Normally Open DC 5-30V Hall Effect Sensor 10mm Sensing 5 Pcs Metal Installation for Hydraulic
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 22 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-hall-effect-sensors
Manufacturer : ZIZEV
MinimumFrequency : 50 hertz
ModelName : ZIZEVyp5gkroc0w
ModelNumber : ZIZEVyp5gkroc0w
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ZIZEVyp5gkroc0w
ProductDescription : 1. Multi Purposes: Hall sensor is applicable to the position measurement of pneumatic, hydraulic, cylinder and piston, and can also be used as limit switch.
2. Metal Usage: Compared with inductive sensor, Hall sensor can be installed in metal, side by side, and can pass through metal for detection.
3. Hall Effect Generation: When the magnetic wooden plaque is close, Hall effect will be generated, and the switch signal will be output after amplification.
4. 5 Pcs Set: The set contains 5 pcs Hall effect sensors, with a wide power supply voltage of DC5V to 30V, ensures wider applications.
5. NPN Normally Open: The Hall switch sensor is NPN normally open type, the sensing distance is 10mm, practical and useful.

Spec:
Item Type: Hall Effect Sensor
Material: ABS
Model: H12N1 N
Control Output: ≤100mA
Sensing Distance: Approx. 10mm/0.4in
Power Supply Voltage: DC 5-30V
Rated Current: 30MA
Response Frequency: ≥2KHz
Working Environment Temperature: -20℃ to 80℃
Application: Hall sensor is applicable to the position measurement of pneumatic, hydraulic, cylinder and piston, and can also be used as limit switch
Features:
1. When the magnetic wooden plaque is close, Hall effect will be generated, and the switch signal will be output after amplification
2. Compared with inductive sensor, it has the following advantages: can be installed in metal, can be installed side by side, and can pass through metal for detection
3. The distance will be affected by the magnetic field strength and the approaching direction of the detected object. Please pay attention to selecting the magnetic field polarity direction S or N

PackageList:
5 x Hall Effect Sensor
ProductSiteLaunchDate : 2024-07-09T15:57:35.083Z
Size : Hole diameter 50mm
UnitCount : 1
UnspscCode : 46000000