Cart 2 india

Specification
AgeRangeDescription : adult
Brand : LBBCQVJK
BulletPoint : Hall Effect Sensors
BulletPoint1 : The BMI160 is a highly integrated, low power inertial measurement unit (IMU) that provides precise acceleration and angular rate (gyroscopic) measurement. Integrates: 16 bit digital, triaxial accelerometer, 16 bit digital, triaxial gyroscope
BulletPoint2 : Flexible digital primary interface to connect to host over I2C or SPI, Extended I2C mode with clock frequencies up to 1 MHz
BulletPoint3 : Wide power supply range: 1.71V~3.6V, Very low power consumption: typ. 925 μA (accelerometer and gyroscope in full operation), Android Lollipop compatible: significant motion and step detector / step counter (5 μA each)
BulletPoint4 : Built-in power management unit (PMU) for advanced power management, Power saving with fast start-up mode of gyroscope
BulletPoint5 : Allocatable FIFO buffer of 1024 bytes (capable of handling external sensor data), Hardware sensor time-stamps for accurate sensor data fusion, Integrated interrupts for enhanced autonomous motion detection, Additional secondary high speed interface for OIS application
Color : One Color
CurrentRating : 925 microamps
ExternallyAssignedProductIdentifier : 9020060903739
ExternallyAssignedProductIdentifier1 : 423988000051
ExternallyAssignedProductIdentifier2 : 0423988000051
ItemName : LBBCQVJK 5-12V USS-HS41TE Hall Water Flow Sensor 0.1-1.0L/Min 1/4" Threaded end Flow Meter
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-hall-effect-sensors
Manufacturer : LBBCQVJK
Material : Copper
MaximumSupplyVoltage : 3.6 volts
MeasuringRange : -32768 - 32767 g, -32768 - 32767 deg/s
ModelName : LBBCQVJK
ModelNumber : LBBCQVJK
MountingType : Flange Mount
NumberOfBoxes : 1
NumberOfItems : 1
OutputType : Digital
PartNumber : LBBCQVJK
ProductDescription : Hall Effect Sensors
feature:
1. Sus304 body, POM
2. The inlet and outlet tube adopts an intubation design, which is convenient for connection and operation;
3. Using Hall IC, stable and reliable;
4. Flow range: 0.1-1.0L/min;
5. Working voltage: DC5-12V;
6. Rated voltage: DC5V;
7. Output voltage (rated DC 5V); high level 4.5V and above; low level 0.5V and below
8. Pulse output duty cycle: 50+-10%
9. Insulation resistance: 100M O and above;
10. Sealing: Seal all holes and fill with 0.8MPa water. There will be no leakage or deformation after 1 minute;
11.-20～120℃;
12. Maximum pressure: 1.2Mpa
13. Intensity: AC500V 50Hz.
14. Cord length: regular 15cm
15. End connection: SM2.54/XH2.54.
ProductSiteLaunchDate : 2024-09-28T03:18:29.374Z
Size : One Size
SpecificUsesForProduct : Motion Detection
StreetDate : 2017-03-12T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 46171600
UpperTemperatureRating : 185 degrees_fahrenheit