Cart 2 india

Specification
Brand : KinHall
BulletPoint1 : Strong Power: The two-stroke engine with high power (1200W) and large displacement (32.7CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5000rpm).
BulletPoint2 : 3-in-1 Functions: Equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs .
BulletPoint3 : Hand pulHigh-quality Materials: The aluminum material with a painted process is glossy and can resist wear, corrosion, and heat. Meanwhile, the plastic material is shock-resistant and anti-deformation.ls start system offering a high degree of flexibility without cable
BulletPoint4 : Saving Fuel: The built-in carburetor can fully atomize fuel to decrease its consumption rate to save costs.The built-in air filter can well filter impurities in gasoline to reduce engine consumption and extend its service life.
BulletPoint5 : Easy to Use: The wireless design and light weight can improve the flexibility of operation. You can pull the rope to start the machine. Besides, the throttle switch, one-button flameout switch, and anti-skid auxiliary handle allow for convenient use.Muffler: The internal silencer can reduce the noise (≤104dB) when in use to protect your hearing.
Color : Onecolor
DrillType : hammer_drill
IncludedComponents : 3 Drills, 1 Point Chisel, Flat Fuel Tank, Funnel, Other Accessories for Assembly
ItemName : 32.7CC 2 Stroke Gasoline Blasting Jack, Heavy Duty Electric Demolition Jack Hammer, Concrete Crusher Chisel Point Bit With Bucket Carry Storage Box Site Worker
ItemTorque : 1.5 newton_meters
ItemTypeKeyword : power-hammer-drills
Manufacturer : KinHall
Material : Aluminum
MaximumPower : 1800 watts
MaximumRotationalSpeed : 5000 rpm
MaximumTorque : 1.5 newton_meters
ModelNumber : 9f9e7bc7-6c92-4f20-987f-0a630c001f91
PowerSourceType : mixed oil (25 gasoline: 1 motor oil)
ProductDescription :

The hammer machine is made of premium aluminum and plastic with high strength. The three functions (hammer/drill/pick) can meet your various needs and the powerful engine can promote your efficient work. It is an ideal choice for electricians, carpenters, etc. 

 

Specification

Color: Black

Material: Aluminum, Plastic

Style: Modern

Surface Treatment: Painted Process

Assembly Required: Yes

Power: 1200W

Displacement: 32.7CC

Engine Type: Single Cylinder, Air Cooling, 2-stroke

Impact Frequency: 3200min-1

Impact Energy: 30J

Max Torque and Speed: 1.5N.m/5000rpm

Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)

Fuel Tank Capacity: 0.9L/0.2gal/30Oz

Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour

Max Drilling Diameter: 40mm/1.5inch

Starter System: Hand Pull Start

Noise: ≤104dB

Net Weight (Exclude Drill): About 10.5kg/23lbs

Product Size (L*H): 24*9inch

Engine Size: 14*12inch

Drill Size: 0.8*13inch

Point Chisel Size: 18*350mm/0.7*13inch

Flat Chisel Size: 16*280mm/6*11inch

Auxiliary Handle Length: 13cm/5inch

Package Included

1* Hammer Drilling Machine

3* Drills

1* Point Chisel

1* Flat Chisel

1* Fuel Tank

1* Funnel

Other Accessories for Assembly

 

Notes

1. Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder. 

2. Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally. 

3. Please add lubricating oil regularly to ensure strong power.

ProductSiteLaunchDate : 2022-04-28T03:33:51.106Z
RegulatoryComplianceCertification : NSHSS.0384GA-022
Speed : 7000 rpm
UnspscCode : 27112700