Cart 2 india

Specification
Brand : mouhtfao
BulletPoint1 : POWERFUL: Jack hammer adopts a high power (1200W), large displacement (32.7CC) two-stroke engine and enlarged thick-walled cylinders, which can realize high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate through concrete, bricks, stones, etc. at high speed (5000rpm)
BulletPoint2 : THREE-IN-ONE FUNCTION: Jack hammer is equipped with three drills and two different chisels, which can be used as hammer, drill or pickaxe by adjusting the knob on the side to meet your diversified needs
BulletPoint3 : FUEL SAVING: Jack hammer built-in carburetor can fully atomize the fuel, reduce the fuel consumption rate and save the cost. jack hammer built-in air filter can well filter the impurities in the gasoline, reduce the engine consumption and prolong the service life
BulletPoint4 : HIGH QUALITY MATERIAL: The jack hammer is made of painted aluminum, which is glossy, wear-resistant and high temperature resistant. Meanwhile, the plastic material is shock-resistant and deformation-resistant
BulletPoint5 : EASY TO USE: Jack hammer is painted and treated with cordless design, light weight, which improves the flexibility of operation. Pull the rope to start the machine. In addition, the throttle switch, one key off switch and anti-slip auxiliary handle are also easy to use
ExternallyAssignedProductIdentifier1 : 0763508843080
ExternallyAssignedProductIdentifier2 : 763508843080
IncludedComponents1 : 1* Hammer Drilling Machine 3* Drills 1* Point Chisel 1* Flat Chisel
IncludedComponents2 : 1* Fuel Tank 1* Funnel Other Accessories for Assembly
ItemName : Demolition Jack Hammer, 1200W 32.7CC 2-Stroke 3-In-1 Jack Hammer Concrete Breaker, 5000RPM High Speed Jackhammer with 3 Drills and 2 Chisels, Hand Pull Start Jack Hammer for Breaking Brick Stone
ItemTypeKeyword : power-hammer-drills
Manufacturer : mouhtfao
ModelName : Demolition Jack Hammer
ModelNumber : GASD56U
PartNumber : GDHYU8
PowerSourceType : Gas Powered
ProductDescription :

Applications

Hammer Function (Drilling While Hammering)

Scope of Application:

This applies to drilling holes in concrete, floors, brick walls, stones, and solid walls. It is suitable for electricians and carpenters.

 

Specification

Color: Black

Material: Aluminum, Plastic

Style: Modern

Surface Treatment: Painted Process

Assembly Required: Yes

Power: 1200W

Displacement: 32.7CC

Engine Type: Single Cylinder, Air Cooling, 2-stroke

Impact Frequency: 3200min-1

Impact Energy: 30J

Max Torque and Speed: 1.5N.m/5000rpm

Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)

Fuel Tank Capacity: 0.9L/0.2gal/30Oz

Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour

Max Drilling Diameter: 40mm/1.5inch

Starter System: Hand Pull Start

Noise: ≤104dB

Net Weight (Exclude Drill): About 10.5kg/23lbs

Product Size (L*H): 63*24cm/24*9inch

Engine Size: 36*32mm/14*12inch

Drill Size: 22*350mm/0.8*13inch

Point Chisel Size: 18*350mm/0.7*13inch

Flat Chisel Size: 16*280mm/6*11inch

Auxiliary Handle Length: 13cm/5inch

Package Included

1* Hammer Drilling Machine

3* Drills

1* Point Chisel

1* Flat Chisel

1* Fuel Tank

1* Funnel

Other Accessories for Assembly

 

Notes

1. Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder.

2. Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally.

3. Please add lubricating oil regularly to ensure strong power.

4. Please do not touch the muffler exhaust hole to avoid scalding.

5. The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.

6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2024-12-14T08:23:33.796Z
RegulatoryComplianceCertification : NSDOS.0384EM-005
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112700
Voltage : 0.01