Cart 2 india

Specification
Brand : FXEIPOL
BulletPoint1 : 【HIGH QUALITY AND DURABLE】: The high quality housing and handle can greatly reduce the reaction force of the machine to make the operation smooth.
BulletPoint2 : 【HIGH POWER】: With a power of 1900w, this gasoline-driven rammer can work at a faster speed and higher efficiency.
BulletPoint3 : 【HIGH PERFORMANCE】: With a maximum output of 2.03 Ps/6500 Rpm and a maximum torque of 0.34kg-m/550 Rpm, this gasoline-driven rammer can work.
BulletPoint4 : 【LOW VIBRATION】: This gasoline-driven rammer uses a two-stroke engine, which has a simple structure and works smoothly with little vibration.
BulletPoint5 : 【WIDE RANGE OF APPLICATION】: This gasoline-driven rammer can be used on many occasions such as piling, such as farm fencing, road reconstruction, garden renovation, construction, etc.
Color : Black
DrillType : hammer_drill
IncludedComponents : 1* Hammer Drilling Machine  3* Drills  1* Point Chisel  1* Flat Chisel  1* Fuel Tank  1* Funnel  Other Accessories for Assembly
IncludedComponents1 : 1* T-Post Driver Machine
IncludedComponents2 : 1* Piling Head
IncludedComponents3 : 1* Proportioning Pot
IncludedComponents4 : 1* Funnel
IncludedComponents5 : 1* Toolkit
ItemName : FXEIPOL T Post Driver Hammer Drills 52CC Gas Powered Piledriver 2-Stroke T-Post Power Hammer Drills with Toolkit Gasoline Petrol Garden Fencing Tool Machine for Road Reconstruction
ItemPackageDimensions_Height : 12.2 inches
ItemPackageDimensions_Length : 26.77 inches
ItemPackageDimensions_Width : 12.2 inches
ItemPackageQuantity : 1
ItemTorque : 1.45 newton_meters
ItemTypeKeyword : power-hammer-drills
Manufacturer : FXEIPOL
Material : Steel
Material1 : Aluminum
Material2 : Plastic
MaximumPower : 1900 watts
MaximumRotationalSpeed : 5300 rpm
MaximumTorque : 1.45 newton_meters
ModelName : T Post Driver Hammer Drills
ModelNumber : HLJ-3367
NumberOfItems : 1
PowerSourceType : Gas Powered
ProductDescription :

Specification

Height: 71cm/27.95in

Body Size: 32*50*26cm/12.59*19.68*10.23in

Engine Type: Two-Stroke, Cold Air, Single Cylinder

Displacement: 52cc

Fuel Tank Capacity: 1 Liter

Fuel Mixture Ratio: 25:1

Must Use Two-Stroke Special Oil

Number Of Revolutions (Idling): 2700rpm +-250

Number Of Revolutions (Loading): 7120rpm

Number Of Revolutions (Maximum): 9880rpm

Maximum Output: 2.03 Ps/6500 Rpm

Maximum Torque: 0.34kg-m/550 Rpm

Power: 1900w

Compression Ratio: 7.4: 1

Fuel Consumption Rate: 380 g/Ps.h

Carburetor Type: Diaphragm Type

Tightening Torque Range: 550 – 1700 N.m (406 – 1250 Ft.Lbs)

Clutch Speed: 1200rpm

Net Weight: 13kg/39.60lbs

Overall Dimensions: 74*34*26cm/29.13*13.39*10.24in

Ignition System Method: Electronic Ignition

Spark Plug Model: Ngk Bpmr6A

Carburetor Type: Diaphragm Type

Impact Part Output Square Shaft Size: 2.54cm/1in

Tightening Torque: 550-1030Nm

Piling Head Diameter: 6CM/2.36inch 8CM/3.14inch

 

Package Included

1* T-Post Driver Machine 

1* Piling Head

1* Proportioning Pot 

1* Funnel 

1* Toolkit

Notes

1. It must use two-stroke special oil.

2. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2024-07-04T09:13:40.379Z
RegulatoryComplianceCertification : NSHSS.0525GC-012
RegulatoryComplianceCertification1 : Q-09-001A
RegulatoryComplianceCertification2 : NSHSS.0635GD-016
Speed : 550 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Voltage : 1