Cart 2 india

Specification
Brand : Hanson
BulletPoint : Size: 3/4-16, Material: High Speed Steel, Finish: Uncoated (Bright), Style: Plug, Cutting Direction: Right Hand, Tap Size: 3/4, Threads Per Inch: 16
BulletPoint1 : 7/16-14.
BulletPoint2 : UNC.
BulletPoint3 : NUMBER OF FLUTES 4.
BulletPoint4 : Application - The hand tap is a versatile tool that can be used to re-thread damaged or jammed threads, or to create new threads. It is suitable for tapping through or shallow holes in mild steels, aluminium, iron, copper, and hard plastic.
BulletPoint5 : Note - Ensure proper alignment, use proper tapping technique and apply even pressure when turning the tap to produce clean, accurate threads. Periodically reverse while tapping to break up chips and remove debris from the flutes to prevent clogging and ensure smooth operation. It is recommended that a suitable cutting lubricant or oil be applied during the tapping process to achieve higher quality threads and more durable taps.
Color : Multicolor
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 042526015397
ExternallyAssignedProductIdentifier2 : 0042526015397
ExternallyAssignedProductIdentifier3 : 00721511441846
FinishType : Titanium
GpsrSafetyAttestation : 1
IncludedComponents : Alfa Tools
ItemDisplayDimensions_Height : 0.4 inches
ItemDisplayDimensions_Length : 3 inches
ItemDisplayDimensions_Width : 0.4 inches
ItemDisplayWeight : 0.07 pounds
ItemName : Irwin 1539 tap 7/16"-14nc bottom
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-threading-taps
Manufacturer : Hanson
Material : Plastic
MeasurementSystem : Metric
ModelNumber : 1539
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 2
PartNumber : HAN1539
ProductDescription :

Features and Benefits:

• Material types: high carbon steel for hand tapping applications and high speed steel for machine tapping where critical dimensions are required
• Etched: tap size and recommended drill bit size are etched on each tool for easy identification
• Point styles: taper, plug, and bottoming styles are available
• All Hanson taps and dies are made in USA

Steel Machine Screw Tap Specs:

• Precision ground straight flutes provide rapid chip removal for efficient threading
• Designed for hand threading work
• Taps produce a class 2B thread
• 1 to 1-1/2 threads chamfered
• Used when threads must go to bottom of hole
• Ideal for all general-purpose threading
• Ideal for tough threading work, routine maintenance, repair and for re-threading where high accuracy and tolerance thread is not critical

ProductSiteLaunchDate : 2006-05-10T06:59:59-00:00
Size : 1
Style : Spiral Point Tap
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500