Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Morse Cutting Tools
BulletPoint1 : List No. 2068
BulletPoint2 : Hand Tap
BulletPoint3 : High Speed Steel
BulletPoint4 : Wide Applications for Industrial and DIY: Designed for metalworking, made from high-speed steel for durability and accuracy. Suitable for materials up to 1/4 inch thick, including thin metal sheets, aluminum, wood, and plastic. The convenient ¼-inch quick-change hex shank features a tapered end to prevent excessive impact and designed to avoid over-drilling and damaging threads
BulletPoint5 : User Tips: For optimal results, remember: 1) Drill slowly and avoid excessive force; 2) Use ample cutting oil; 3) Take time for precision work; 4) Backtrack slightly before re-cutting for better results; 5) Pre-drill a guide hole when working with harder metals. These tips ensure efficient use and enhance your overall experience with the product
BulletPoint6 : Easy to Maintenance:Superior rust-resistant finish prevent dirty from sticking to tap surface, clean tap by cloth is enough in Daily Use.
Color : One Color
ExternallyAssignedProductIdentifier : 8047292369783
ExternallyAssignedProductIdentifier1 : 686125337445
ExternallyAssignedProductIdentifier2 : 0686125337445
ExternallyAssignedProductIdentifier3 : 00686125337445
FinishType : Titanium
IncludedComponents : Drill & Tap Bits Set
ItemName : Morse Cutting Tools 33744 Straight Flute Hand Taps, High-Speed Steel, Bright Finish, Plug Type, H2 Pitch Diameter, 4 Flutes, 10-24 Size
ItemPackageDimensions_Height : 2.032 centimeters
ItemPackageDimensions_Length : 13.462 centimeters
ItemPackageDimensions_Width : 4.826 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-threading-taps
Manufacturer : Morse Cutting Tools
Material : High Speed Steel
ModelName : CPFDPSJF
ModelNumber : 33744
NumberOfBoxes : 1
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 33744
ProductDescription :

Cvatiz Product Introduction:

1. Drill and wire combination drill bit set can be used for tapping various threads to meet different needs - including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, 6 Metric sizes: M3x0.5 / M4x0.7 / M5x0.8 / M6x1 / M8x1.25 / M10x1.5, 1 piece Quick Change Adapter.

2. They are designed for drilling, tapping, deburring and countersinking in wood, plastic,aluminum, soft material sheet metal.

3. Equipped with 1/4-inch hexagonal quick-change handle, which can be used for bench drills, electric hand drills, impact drills, electric screwdrivers and other tapping machines.

4. They are designed for drilling tap holes in workpieces and are not suitable for drilling blind holes (it will break the drill bit when drilling workpieces thicker than its working range). Use a bench drill to drill up to 3/16 inches. (5 mm) thick; use a hand drill to drill up to 1/8 inches. (3 mm) thick.

Material: High speed steel

Hex Shank: 1/4"

Packing List:

6 x SAE sizes Combination drill bit

6 x Metric sizes Combination drill bit

1 x Quick change adapter

1 x Storage box

Usage Tips:

Following a few tips can save you some time:

1. Thin drill bits break more easily than thick drill bits, so be careful when drilling with a thin drill bit to make sure it is perfectly straight.

2. Before you start drilling, apply some cutting oil. Not only does it make drilling easier, it also prevents the drill bit from breaking. It also prevents the drill bit from overheating and damage.

3. Do not push hard, otherwise the drill bit will be damaged.

4. Start drilling into the surface slowly and gradually increase the speed. Drilling at high speed at the starting point may cause slippage.

ProductSiteLaunchDate : 2014-11-21T08:00:01.000Z
Size : One Size
StreetDate : 2017-11-25T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Wood
SurfaceRecommendation3 : Aluminum
SurfaceRecommendation4 : Plastic
UnitCount : 1
UnspscCode : 27112806