Cart 2 india

Specification
Brand : YG
BulletPoint1 : High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
BulletPoint2 : Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
BulletPoint3 : Round shanks allow use with a wide variety of toolholding systems
BulletPoint4 : Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
BulletPoint5 : Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
Color : Multi
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 038548993744
ExternallyAssignedProductIdentifier2 : 0038548993744
ExternallyAssignedProductIdentifier3 : 00038548993744
ExternallyAssignedProductIdentifier4 : 20038548993748
FinishType : Nitride Coated
GpsrSafetyAttestation : 1
ImportDesignation : Made in the USA
IncludedComponents : Tap Bottom 1/2in-13nc SAE STL
ItemDisplayWeight : 0.1 pounds
ItemName : YG-1 Z6 Series Vanadium Alloy HSS Roll Form Tap with Oil Groove, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, #10-32 Thread Size, H4 Tolerance
ItemPackageDimensions_Height : 7.7 centimeters
ItemPackageDimensions_Length : 1.1 centimeters
ItemPackageDimensions_Width : 1.5 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : hand-threading-taps
Manufacturer : YG-1 Tool Company
Material : high-speed steel
ModelName : 1788676
ModelNumber : Z6344
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Z6344
Pattern : Solid
ProductDescription :
Thread Size: M4 x 0.7 (right hand)
Tolerance: H2 (Accuracy)
Thread Length: 12.9mm / 0.51"
Total Length: 56.5mm / 2.22"
Square Shank Width: 3.8mm / 0.15" (Round Shank Dia.: 4.9mm / 0.19")
Material: 6542/M2 High Speed Steel (HSS)
Finish: Nitride Coated
Manufacturing Process: Fully Ground
Package Included: 4pcs x Spiral Point Thread Taps


Metric thread tap features spiral point, plug chamfer and right hand thread cutting. Straight flutes are fully ground to provide downward chip removal. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
6542 (M2) high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Nitride coating increases hardness, enhances wear resistance, and reduces friction for longer service life, resulting in smoother, faster tapping performance.
Spiral point tap is suitable for through-hole threads. Used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, and hard plastics. Flutes on the screw tap help to remove chips and debris from the hole.
Machine threading tap is used with drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Drill holes with a twist drill bit first, then tap with a thread tap. Tapping angle should be 90 degrees vertical and stable. The tapping depth should not exceed 1.5 times the diameter of the tap. Control speed according to the material hardness. The higher the hardness, the slower the speed.

ProductSiteLaunchDate : 2013-09-23T00:00:01-07:00
Size : #10
SpecificUsesForProduct : Machine Tapping
StreetDate : 2017-03-12T00:00:01Z
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700
WarrantyDescription : Warranty