Cart 2 india

Specification
AutoPartPosition : front
BikeType : Cruiser Bike
Brand : OXWIND
BulletPoint1 : [ 10 Seconds Warming Up ] OXWIND Motorcycle Heated Grip Covers with large heating plate and fast heating speed. It heats up in 10 seconds, so that your hands are no longer cold in the cold winter.
BulletPoint2 : [ 3-level Temperature ] The 12V heated grips handlebar warmer built-in intelligent temperature control chip, and three gears can be adjusted at any time. Intelligent temperature control is safer.
BulletPoint3 : [ Upgraded IP67 Waterproof ] Full Body in IP67 Waterproof Level. When riding, the motorcycle heat pad no fear of water or raining. Ensure safe using even when raining.
BulletPoint4 : [ Universal for Most Handlebar ] Both heating pad with removable design, work with all 12V motorcycles, ATV, electromobile, scooters, walking tractor, etc.
BulletPoint5 : [ NOTE ] Please check size before ordering. Please read the installation diagram carefully before installation. Wrong wiring method may cause damage to components.
Color : 12V
CompatibleWithVehicleType1 : 12V motorcycle
CompatibleWithVehicleType2 : 12V ATV
CompatibleWithVehicleType3 : 12V Scooter
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier : 9097415404869
ExternallyAssignedProductIdentifier1 : 774388372478
ExternallyAssignedProductIdentifier2 : 0774388372478
ImportDesignation : Imported
IncludedComponents : 1 Pair 12V Motorcycle grip cover
IsAssemblyRequired : 1
ItemName : Motorcycle Heated Grip Pads 12V Compatible with Harley Davidson, Universal Motorcycles & ATVs Heating Handlebar Cover - 3 Temperature Adjustable & Fast Heating Hand Heater Warmer for Riding
ItemPackageDimensions_Height : 18.6 centimeters
ItemPackageDimensions_Length : 3.5 centimeters
ItemPackageDimensions_Width : 12.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : powersports-handlebar-accessories
Manufacturer : 1
Material : composite fiber heating wire + Kevlar wear-resistant cloth, stainless steel(L bracket)
ModelName : 12V Heated Grip Covers
ModelNumber : Motorcycle Heated Grip Pads 12V
NumberOfBoxes : 1
NumberOfItems : 1
OeManufacturer : Handlebar
PartNumber : 1
ProductDescription : OXWIND 12V Adjustable ATV Motorcycle Heated Grips Motorbike Handle Heating Heater Bicycle Winter Motorcycle Accessories
Are You Afraid to Drive Your Motorcycle in Cold Weather? With this Motorcycle Handlebar Heater, All Problems Will be Solved. Fast Heating, the Motorcycle Heated Pad Only Takes 10 Seconds to Get Warm. The Large Heating Surface Cover All of Our Palm. Just Say ''NO'' to Frozen.

Package Contents:

1 x Heated Grips Covers with gear switch
1 x Double side glue 5 x Cable tie 1 x Stainless steel L bracket

Wiring Instruction

Black Cable Connect to the Negative Polarity of Battery.
Red Cable Connect to the Positive Polarity of Battery.
Note：(the lamp does not turn on when the connection is reversed, only heating)

Specification:

Input voltage: DC12V
Cable length: 108CM (heating film to switch), 146CM (switch to electric door lock)
Working temperature: -30°C---+100°C
Power: high-end 20W, mid-range 15W, low-end 10W
Material: composite fiber heating wire + Kevlar wear-resistant cloth, stainless steel(L bracket)
Installation method: 3M glue sticking and fixing, L bracket lens holder fixing

Instructions:

Power on: red light, blue light and green light each flash once and then go out
Standby: the red light is breathing and flashing, and the temperature reaches a certain temperature and it will automatically turn into a blue light
Working status: indicator light is always on (high-end: red light is always on, mid-range: blue light is always on, low-end, green light is always on)
Click on the key: switch gears

Note:

1. The positive and negative poles are connected reversely, the switch cannot be used, and the heating directly heats up.
2. Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, if the temperature of the electric heating grip cover cannot be sensed in time due to the numbness of the hand, please use the low or medium gear first to prevent high temperature burns.
3. This product is only suitable for motorcycles with 12V battery. Please read the installation diagram carefully before installation. Incorrect wiring will cause damage to the components.
4. This product can only be installed on the handlebars of motorcycles when it is energized. You can use a battery to test whether the product is properly energized before installation.
5. It is strictly forbidden to energize and work when not riding (empty burn) to prevent the electric handle from being too high and damaging the original handle.
6. It is recommended to connect the electric door lock cable to the wiring. Most models have black positive pole and green negative pole. For specific conditions, it is recommended to use a multimeter to measure.
7. Please allow 1-3cm of size difference due to manual measurement.

ProductSiteLaunchDate : 2024-09-25T07:54:49.478Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
WarrantyDescription : 2