Cart 2 india

Specification
AgeRangeDescription : adult
Brand : MXBAOHENG
BulletPoint1 : This instrument is designed and manufactured according to the standard of ISO2409-1992, and is applicable to GB/T9286-98, BS 3900 E6.The instrument draw the grid of a certain size by a certain specification of the tools by using the uniform force, cut and penetrate the coating to be a grid lattice graphics, to evaluate the adhesion of coating on the substrate through the assessment of the full extent of the grid.
BulletPoint2 : There are six classes of grid lattice graphics, the assessment of coating separation from the substrate resistance is showing as different classes.It is widely used to evaluate the adhesion of various coatings. It is not only to be used in the laboratory, can also be used under various conditions of the construction site.
BulletPoint3 : Gloves should always be worn when handling the cartridge
BulletPoint4 : Resolution: 1 point Increment
BulletPoint5 : Model: h-1000 Type a
BulletPoint6 : (5)Automatic backlight and buzzer alarm function.
Color : One Color
ExternallyAssignedProductIdentifier : 5990015667662
ExternallyAssignedProductIdentifier1 : 662980748275
ExternallyAssignedProductIdentifier2 : 0662980748275
ExternallyAssignedProductIdentifier3 : 00662980748275
IncludedComponents : Portable Leeb Hardness Tester
ItemName : Cross Hatch Adhesion Tester Instruction Cross-Cut Tester USG
ItemPackageDimensions_Height : 15.1892 centimeters
ItemPackageDimensions_Length : 3.4036 centimeters
ItemPackageDimensions_Width : 3.6068 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : MXBAOHENG
Material : Plastic
MeasurementAccuracy : PRECISE
ModelName : IAICINKKY
ModelNumber : HQ-652
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : HQ-652
PowerSourceType : Battery Powered
ProductDescription :

Technical Specification:
Multi-blade cutter spacing: 1 +0.01mm, 2+0.01mm.
Multi-blade cutter addendum straightness: ≯0.003mm ≯ 0.006mm.
Multi-blade cutter tooth tip width: ≯ 0.05mm.
Cutter spacing and cutter types: 1mm 11 teeth and 2mm 11 teeth

Operation and user instruction:
1. Placing the test piece on a tablet of sufficient hardness.
2. Holding the handle of the program grid, keeping the multi-blade cutter perpendicular to the plane of the test piece.
3. By using the uniform force, with the manner of not fibrillation and balance and 20-50mm/S cutting speed to draw.
4. Rotating the test piece to 90 degree repeating the above operations, so as to enable to cut a grid lattice graphics.
5. Brushing the two diagonals of grid lattice graphics by using the soft brush gently backward and forward each five times.
6. The test should be taken at least in three different locations on the test piece. If the results of three positions are different, the test should be repeated in more than three positions, and record all results.
7. If it need to replace the multi-blade cutter, use the screwdriver to unscrew the two screws on the cutter body and change the cutter, affix the edge of cutter to the handle, then tighten the screws.


ProductSiteLaunchDate : 2016-08-20T07:00:00.000Z
SafetyDataSheetUrl : http://www.documents.walter.com/idbDocuments/msds/walter_us/en/S-08.PDF
Size : One Size
SpecificationMet : Iso2409-1992
StreetDate : 2017-03-12T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41113600