Cart 2 india

Specification
Brand : ILOPM
BulletPoint1 : 【D Type device】: Dimensions: f20*70mm, weight: 75g. General purpose type, used for most hardness measurements
BulletPoint2 : 【D+15 Type device】: Dimensions: f20*162mm, weight: 80g. Small head, used to measure the hardness of the outer surface of grooves or recesses
BulletPoint3 : 【C Type device】: Dimensions: f20*141mm, weight: 75g. The impact energy is large, the Leeb hardness tester is used to measure the hardness of small, light, thin parts and the surface softening layer
BulletPoint4 : 【G Type device】: Dimensions: f30*254mm, weight: 250g. The impact energy is large, and the requirement for measuring the outer surface is low. Used for large, heavy and rough forging castings
BulletPoint5 : 【DL Type device】: Dimensions: f20*202mm, weight: 80g, the head becomes thinner and larger, the Leeb hardness tester is used to measure the hardness of narrow grooves and gear surfaces
Color : Hardness- D 15 Type
ExternallyAssignedProductIdentifier : 7509082001149
IncludedComponents : MAIN HOST
ItemName : Durometer Tester, 360° Metal Hardness Tester Durometer For HRC,HRA,HV,HS,HL,HB,HRB,Hardness Testing Gauge Work On Steel,Cast Steel,Stainless Steel,Accurate Measurement(Hardness- D 15 Type)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : ILOPM
Material : metal
MeasurementAccuracy : HIGH ACCURACY
ModelName : 5449844
ModelNumber : 5449844
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 5449844
ProductDescription : 360° Metal Hardness Tester Durometer For HRC,HRA,HV,HS,HL,HB,HRB
D- type Hardness Testing Gauge Work on Steel, Cast Steel.....
(170-960)HLD
(17-68.5)HRC
(19-651)HB
(80-976)HV
(30-100)HS
(59-85)HRA
(13-100)HRB
D-type For HRC,HRA,HV,HS,HL,HB,HRB,Hardness Testing Gauge
Accuracy: ≤6HLD (HLD=800)
Repeatability: ≤6HLD (HLD=800)
Resolution: 1HL, 1HV, 1HB, 0.1HRB, 0.1HRC, 0.1HS
Materials: steel & cast steel alloy tool steel stainless steel, grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy.
Impact devices: D (optional impact devices: C,G,DC,DL)
Packing List
1. Main unit
2. model *type impact device With cable
3. Cleaning brush
4. Small support ring
5. Manual
6. Instrument package
Kindly Tips
This SOONDA SKD-552 Leeb hardness tester instrument is a precision measuring instrument for engineering metal hardness.
Before you buy,
1. please confirm whether your measuring material meets the measurement of this instrument;
2. The measured value is suitable;
3. You can leave the address and send it to you The electronic version of the manual, the translator translates into the native language to read;
4. If you need help, please leave a message to contact;
5 .happy shopping
360° Metal Hardness Tester Durometer For HRC,HRA,HV,HS,HL,HB,HRB,
1. According to the measuring principle of Leeb hardness, it can carry out high-precision detection of a variety of metal materials.
2. It supports "forged steel (Steel)" material. When using D/DC type impact device to test "forged steel" sample, you can directly
Read the HB value without manual check-up.
3. It is convenient to switch to all hardness standards (HL, HB, HRB, HRC, HRA, HV, HS), and convert each hardness in parallel
System measurement value.
4. Adopt large-screen 128×64 graphic dot matrix liquid crystal d-isplay, which is rich in in
ProductSiteLaunchDate : 2024-10-23T03:15:27.090Z
Size : Large
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41114611