Cart 2 india

Specification
Brand : Marhynchus
BulletPoint : Durometer Rubber Tire Durometer Type A Hardness Tester Meter
BulletPoint1 : [Long Battery Life] Dynamic sleep algorithm for up to 5000 hours of working time on a single .
BulletPoint2 : [360 Degree Measurement] Built-in direction sensor compensates for impact errors in all directions.
BulletPoint3 : [High Accuracy Measurement] Tungsten carbide impact body and double coil technology for precise results.
BulletPoint4 : [One-piece Body Design] Compact and versatile, with 10 metal material options for various applications.
BulletPoint5 : [Multiple Hardness Scales] Direct output data for hl, hv, hb, hs, hra, hrb, hrc scales.
ExternallyAssignedProductIdentifier1 : 0606052742617
ExternallyAssignedProductIdentifier2 : 606052742617
ItemName : Hardness Tester, Portable Hardness Gauge Durometer USB C Charging Hardness Meter Tester
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : Marhynchus
ModelName : Marhynchusxhq1k6prbo
ModelNumber : Marhynchusxhq1k6prbo
NumberOfItems : 1
PartNumber : Marhynchusxhq1k6prbo
ProductDescription : Specification:
Item Type: Digital Hardness Tester
Material: ABS
Impact Device: DC type
Hardness Scale: HL, HV, HB, HS, HRA, HRB, HRC
Measuring Range: HLD(170-960), HV(83-976), HB(30-651), HRC(17.6-68.5), HS(26.4-99.5), HRB(13.5-100), HRA(60-85.8)
Resolution: 1HL
Measurement Accuracy: ±6HL
Repeatability: 6HL
Display Screen: 128x64 dot organic light emitting diode
Power Supply Mode: 1 x 3.7V rechargeable lithium battery 250mAh (built in), over 5000 times continuous measurements with a single full
Charging Interface: USB (Type C)
Operating Temperature Range: -10℃ to 50℃, 0-85%RH (non condensing)
Storage Temperature Range: -10℃ to 60℃, 0-85%RH (non condensing)

packing list:
1 x Digital Hardness Tester
1 x Brush
1 x Accessory
1 x USB Cable
1 x Manual

Note:
1. During measurement, the distance between any two indentations should not be less than 3mm, and the distance between the center of the indentation and the of the object to be measured should not be less than 5mm.
2. After use, the impact body should be released.
3. It is strictly forbidden to use lubricants in the impact device.
ProductSiteLaunchDate : 2024-11-30T17:05:32.952Z
Size : HT-1208
UnitCount : 1
UnspscCode : 53121600