Cart 2 india

Specification
Brand : Lancoon
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
BulletPoint6 : Wide Application: Can be widely used for electric power, petrochemical, machinery manufacturing, metallurgy, vehicle and other industries
Color : Ht-1208
ExternallyAssignedProductIdentifier : 7440009291604
ExternallyAssignedProductIdentifier1 : 603908245407
ExternallyAssignedProductIdentifier2 : 0603908245407
ExternallyAssignedProductIdentifier3 : 00603908245407
FinishType1 : Finish
FinishType2 : Finish
FinishType3 : Finish
FinishType4 : Finish
FinishType5 : Finish
GpsrSafetyAttestation : 1
IncludedComponents : Rubber Hardness Tester
IncludedComponents1 : inc
IncludedComponents2 : inc
IncludedComponents3 : inc
IncludedComponents4 : inc
IncludedComponents5 : inc
ItemName : Lancoon Rubber Hardness Tester, Shore Type A Tire Durometer with Large Dial Pointer 0-100HA Durable Practical Analog Display for Leather Wax Poly Fat
ItemPackageDimensions_Height : 12.9 centimeters
ItemPackageDimensions_Length : 3.4 centimeters
ItemPackageDimensions_Width : 7.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : Lancoon
Material : Alloy+Metal
Material1 : Material
Material2 : Material
Material3 : Material
Material4 : Material
Material5 : Material
ModelNumber : 64AAA964
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : LK-NE19
PowerSourceType : PowerSource
ProductDescription :

Specification:

Material: Alloy+Metal

Type: A

Dial Value: 0-100HA

Hardness: 40-70 is suitable

Pressure Needle Trip: 0-2.5mm

Pressure Needle End Pressure: 0.55N-8.06N

Accuracy: 0.1mm

Test Force: 0.5N

Item Size: 5.3x2.6x7.6cm/2.1x1.02x3in

Packing Size: 7.5x3.5x12.5cm/2.95x1.38x4.92in

Item Weight: 200g/7.05oz

Method of Use

1. Place the specimen on a solid surface and hold the hardness tester with the indenter at least 12mm from the edge of the specimen.

2. Press the pressure foot steadily on the specimen, so that the pressure needle is pressed vertically into the specimen until the pressure foot and the specimen are in complete contact with the readings within 1S.

3. Test the hardness value 5 times at different locations where the measuring points are at least 6mm apart, and take the average value.

4. in order to stabilize the test conditions, improve the accuracy of the test, the hardness tester should be installed in the matching production of the same type of measuring frame.

ProductSiteLaunchDate : 2023-08-02T03:04:32.669Z
Size : 2 in x 2 in x 1/4 in
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41113700