Cart 2 india

Specification
BatteriesRequired : 1
Brand : YFYIQI
BulletPoint : 12pcs Support Rings for Leeb Hardness Tester
BulletPoint1 : Load under pressure: 50g
BulletPoint2 : Head shape and size: Ball R12.70
BulletPoint3 : Adjust the 0 bit, when the pointer is not in the 0 bit, turn the adjustment ring, so that the pointer to 0.
BulletPoint4 : The determination was made at 3~5 times per assay, and then the average number was calculated, as well as the hardness of the part.
BulletPoint5 : When used, the hardness is pressed in the sand on the test plane (axis hardness of the surface to be perpendicular to the plane of the sand), sand hardness meter gauge plane and the close contact, the pointer is stopped at a certain value, press the locking pin to lock, reading test a fixed value, and then releasing the locking pin so that the pointer reply 0.
Color : as picture show
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier : 8785110632830
IncludedComponents : sand mould surface Hardness Tester
ItemName : YFYIQI Mould Surface Hardness Tester for Green Sand Mold with B Type Maximum Load 980G Compression Stroke 2.50mm
ItemPackageDimensions_Height : 20 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardness-testing-apparatus
Manufacturer : YFYIQI
MeasurementAccuracy : high
ModelName : WRFUU123
ModelNumber : 202503070910
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 202503070910
ProductDescription : YFYIQI Mould Surface Hardness Tester for Green Sand Mold with B Type Maximum Load 980G Compression Stroke 2.50mm

Usage method:

★Adjust the 0 bit, when the pointer is not in the 0 bit, turn the adjustment ring, so that the pointer to 0.

★When used, the hardness is pressed in the sand on the test plane (axis hardness of the surface to be perpendicular to the plane of the sand), sand hardness meter gauge plane and the close contact, the pointer is stopped at a certain value, press the locking pin to lock, reading test a fixed value, and then releasing the locking pin so that the pointer reply 0.

★The determination was made at 3~5 times per assay, and then the average number was calculated, as well as the hardness of the part.

Technical parameter:

★Model: B type

★Compression stroke: 2.50mm

★Maximum load: 980G

★Load under pressure: 50g

★Head shape and size: Ball R12.70

★Accuracy:
When the pointer is at any value, the relative force of the pressure head is equal to + 5%
When the pointer goes back to the 0 bit, the tolerance is 1 degrees

★Outline size:90 x 55 x 28mm
ProductSiteLaunchDate : 2025-03-06T08:00:00.000Z
Size : 300g
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41114611