Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Listing Includes: 1 (One) Cargo Trailer Hasp Keeper Part # 1338
BulletPoint2 : ZINC PLATED to resist rust.Hasp is used to lock your cam bar into place on your cargo trailer or other unit.
BulletPoint3 : OVERALL ROUGH MEASUREMENTS 5.75” Long x 1.25” Wide Will stick out from your trailer roughly 2.25” SCREW HOLES 4.75” on center x .25”" from ends
BulletPoint4 : NO MOUNTING HARDWARE - NO LOCK You must provide lock fits roughly a .50” diameter lock - you should go smaller as this will be a tight fit.
BulletPoint5 : PREPARATION & INSTALLATION Place your handle on your unit where desired and mark the screw holes with grease pencil or marker, be sure to use a level on the sides to assure the handle is straight.
BulletPoint6 : Check to see if the handle will rub or cause problems with your door or if the person who the handle is intended for needs the handle placed higher or lower on the unit. DO NOT DRILL ANY HOLES IN YOUR UNIT UNTIL YOU HAVE MEASURED AND TESTED THE PLACING OF THE HANDLE. Most dealers place a small bead of caulk under the lock bracket to prevent water from entering in the screw holes that are new in your unit and to help secure the lock.
Color : Silver
ControllerType : Hand Control
ControlMethod : remote
ExternallyAssignedProductIdentifier1 : 0310122550032
ExternallyAssignedProductIdentifier2 : 310122550032
FinishType : Unfinished
IncludedComponents : hasp
ItemDisplayDimensions_Height : 0.39 centimeters
ItemDisplayDimensions_Length : 46.8 centimeters
ItemDisplayDimensions_Width : 1.18 centimeters
ItemForm : Coil
ItemName : New HASP Keeper Cargo Trailer Door Handle bar Padlock Lock Swing Hauler cam 1338 by VV Brother's Store
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 18 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : hardware-hasps
LockType : Key Lock
Manufacturer : Generic
Material : Steel
ModelNumber : 102921
MountingType : Door Mount
PartNumber : ATP-1
ProductDescription : Listing Includes: 1 (One) Cargo Trailer Hasp Keeper Part # 1338 ZINC PLATED to resist rust.Hasp is used to lock your cam bar into place on your cargo trailer or other unit. OVERALL ROUGH MEASUREMENTS 5.75” Long x 1.25” Wide Will stick out from your trailer roughly 2.25” SCREW HOLES 4.75” on center x .25”" from ends NO MOUNTING HARDWARE - NO LOCK You must provide lock fits roughly a .50” diameter lock - you should go smaller as this will be a tight fit. PREPARATION & INSTALLATION Place your handle on your unit where desired and mark the screw holes with grease pencil or marker, be sure to use a level on the sides to assure the handle is straight. Check to see if the handle will rub or cause problems with your door or if the person who the handle is intended for needs the handle placed higher or lower on the unit. DO NOT DRILL ANY HOLES IN YOUR UNIT UNTIL YOU HAVE MEASURED AND TESTED THE PLACING OF THE HANDLE. Most dealers place a small bead of caulk under the lock bracket to prevent water from entering in the screw holes that are new in your unit and to help secure the lock.
ProductSiteLaunchDate : 2022-06-25T03:17:42.099Z
Size : 120X0.25CM
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 46171500