Cart 2 india

Specification
Brand : JRready
BulletPoint1 : 【High Quality Splices】JRready crimp splices are made of high-conductivity seamless purple copper, will not crack when crimped. The surface of the copper tube adopts matte tin plating process, after 48h salt spray test, no coating peeled off on the surface, showing excellent corrosion resistance.
BulletPoint2 : 【Features】The openings at both ends of the copper tube are chamfered so that the wires will not fall apart when inserted and will not be damaged. The wire stop structure design ensures that the insertion depth of the wires at both ends is consistent. The large inspection window design makes it easy to observe whether the wire is inserted in place, ensuring safe and reliable crimping every time.
BulletPoint3 : 【IP68 Waterproof】The PVDF(-55~150℃/-67~302°F) and PE(-55~125℃/-67~257°F) insulation sleeves feature a 3:1 shrink ratio, and independent hot melt rings at both ends enable it to seal up to 2 wires, achieving IP68 waterproof rating. Copper tubes, PVDF/PE sleeves and crimp die of the same color are in one-to-one correspondence to avoid incorrect operations, ensuring excellent waterproof performance and stable electrical connections.
BulletPoint4 : 【Safe & Reliable】The PVDF insulation sleeve(M81824 Standard) has a VW-1 flame rating. PVDF tubes can be matched with high temperature wires(temperature resistance above 135℃/275℉). PE tubes can be matched with general wires(temperature resistance above 80℃/176℉). Excellent performance allows you to use it with confidence even in humid and harsh environments.
BulletPoint5 : 【Advantages】Compared with the crimped or soldered one-piece type: The JRready split type butt connector does not cause the outer heat shrink sleeve to be crushed. You have much better control over, and clear view of the actual crimp. You also can avoid situations where the solder fails to melt or the insulation sleeve melts before the solder does. Compared with single copper tube: JRready's are equipped with heat shrink sleeves, making waterproof insulation safer.
BulletPoint6 : 【Wide Range Of Application】This heat shrink butt connectors has the advantages of waterproof, heat-proof, corrosion-proof, pressure-resistant, wear-resistant, easy to install, low installation cost and space saving. It is mainly used in railroad, ship, automobile, electric power, electronics, family electrical wire connections and other industries, ideal for diverse wire connection needs.
Color : Clear
ExternallyAssignedProductIdentifier1 : 712492713596
ExternallyAssignedProductIdentifier2 : 0712492713596
GpsrSafetyAttestation : 1
IncludedComponents1 : 100 Pcs 12# Butt Splices, 100 Pcs 16# Butt Splices, 100 Pcs 20# Butt Splices
IncludedComponents2 : 100 Pcs 12# PVDF Sleeves, 100 Pcs 16# PVDF Sleeves, 100 Pcs 20# PVDF Sleeves
IncludedComponents3 : 100 Pcs 12# PE Sleeves, 100 Pcs 16# PE Sleeves, 100 Pcs 20# PE Sleeves
IncludedComponents4 : 1 Pc ACT-232 Crimping Tool
IncludedComponents5 : 1 Pc G411 Go No-Go Gauge
ItemName : JRready ST2171 Heat Shrink Wire Connectors Kit IP68 Waterproof M81824/1 PVDF/PE Heat Shrink Tinned Copper Butt Crimp Electrical Wire 12-26AWG Connectors for Marine Automotive
ItemPackageDimensions_Height : 7.17 inches
ItemPackageDimensions_Length : 11.02 inches
ItemPackageDimensions_Width : 2.28 inches
ItemPackageQuantity : 1
ItemTypeKeyword : heat-shrink-tubing
Manufacturer : JRready
Material : polyvinylidene_fluoride_pvdf, tin, iron, copper
ModelName : ACT-232 Crimper+Butt Connectors(300Sets)
ModelNumber : ACT-232 Crimper+Butt Connectors(300Sets)
PartNumber : a18051400ux0431
ProductDescription : JRready ST2171 Heat Shrink Wire Connectors Kit IP68 Waterproof M81824/1 PVDF/PE Heat Shrink Tinned Copper Butt Crimp Electrical Wire 12-26AWG Connectors for Marine Automotive
ProductSiteLaunchDate : 2023-11-25T03:45:44.495Z
Size : 85mm-3.28 Ft
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 902
UnspscCode : 39121400