Specification Brand : wisuwore BulletPoint1 : 3:1 Shrinkage: Excellent shrinkage properties, returns to 1/3 of original diameter and makes a tight seal. Shrinks at high temperatures, plasticizes on cooling, shrink tighter and Seal better than 2:1. BulletPoint2 : Dual wall tubing: The inner layer of heat activated adhesive, increase the sealing performance so that it has excellent moisture, water and dust resistance; the outer layer of polyolefin material insulation, corrosion-resistant, wear-resistant. BulletPoint3 : Industrial Grade: Industrial grade tubing resists high pressure, high temperature and mechanical stretching. Flame-retardant performance up to VW-1; the material is environmentally friendly non-toxic and non-hazardous, safer and more assured of use. BulletPoint4 : Easy to use: Pre-applied Heat Activated Adhesive simply slides the heat shrink tubing over the connection point and heats up, completing a professional insulated and sealed connection in seconds, most damaged equipment can be repaired without removing the connector. BulletPoint5 : Wide range of applications: Suitable for a variety of environments, such as construction sites, indoor decoration, outdoor facilities, aviation and marine sealing field, commonly used in wire connection, wire end processing, solder joint protection, wire harness marking, resistance and capacitance insulation protection, corrosion protection of metal rods or tubes, antenna protection and so on. Color : Red ConnectorGender : Male-to-Female ExternallyAssignedProductIdentifier1 : 0718653728409 ExternallyAssignedProductIdentifier2 : 718653728409 InputCurrent : 13 amps InstallationType : Self-Adhesive IsUlListed : 1 ItemLength : 144 inches ItemName : wisuwore 3/4" Heat Shrink Tubing, 3:1 Heat Shrinkable Tubing with Adhesive Lining Eco-Friendly Flame Retardancy Industrial Grade Sleeving Tube Wrap Cable Wire 50 Feet Roll ItemPackageDimensions_Height : 5.4 centimeters ItemPackageDimensions_Length : 25 centimeters ItemPackageDimensions_Width : 25 centimeters ItemPackageQuantity : 1 ItemShape : Rectangle ItemTypeKeyword : heat-shrink-tubing Manufacturer : wisuwore Material : polyolefin MaximumCurrent : 13 amps MaximumSurgeRating : 1625 joules ModelNumber : QY08 NumberOfItems : 1 PartNumber : 50Ft-RSG-19.1-Red PowerPlugType : type_b_3pin_na ProductDescription : Dual Wall Shrink Tubing Dual wall heat shrink tubing provides better rigidity and abrasion resistance. Dual wall tubing design has the increased ability to stand up to wear and tear. This wire heat shrink tubing is perfect for everyone.
This industrial grade heat shrinkable tubing is compliant with all relevant electrical standards such as: SGS, RoHS, Reach, and ISO9001.
Heat Activated Adhesive Lining This is a resistant shrink tubing with the internal adhesive layer. When heat is applied, shrink tubing recovers and the internal adhesive layer melts. A small fillet of clear adhesive (about 1 mm wide) becomes visible at the end of the heated tubing. When cooled down, it forms a rigid seal. Heat activated glue strongly adheres to wires, terminals or any other surfaces. When adhesive flows, it pushes the air out and fills any gaps between the wire and the tubing, which makes the connection resistant. For best results we recommend using a heat gun. ProductSiteLaunchDate : 2024-04-22T11:19:39.666Z RecommendedUsesForProduct : Outdoor Size : Dia-3/4''- 50 Feet Style : fashion SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 TotalPowerOutlets : 3 UnitCount : 1 UnspscCode : 40183006 Voltage : 125 volts_of_alternating_current