Cart 2 india

Specification
Brand : Draper
BulletPoint1 : Tx-Star key is compatible with Torx fixing systems
BulletPoint2 : Manufactured from hardened and tempered chrome vanadium steel
BulletPoint3 : Chemically blacked protective finish and chamfered ends
BulletPoint4 : Provide more swivel room for each wrench
BulletPoint5 : Reaches to awkward angles that regular hex keys can’t reach
Color : Blue
CompatibleFastenerDescription : 0.75 inches
CustomerPackageType : 1
DriveSystem : Hexagon socket
ExternallyAssignedProductIdentifier : 4989433315355
ExternallyAssignedProductIdentifier1 : 5010559336326
ExternallyAssignedProductIdentifier2 : 05010559336326
FinishType : Powder Coated
FitType : Universal
GpsrSafetyAttestation : 1
ItemLength : 76 millimeters
ItemName : Draper 33632 TX-Star T40 Tip Key
ItemPackageDimensions_Height : 28.8 centimeters
ItemPackageDimensions_Length : 0.5 centimeters
ItemPackageDimensions_Width : 14.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hex-keys
Manufacturer : Draper
Material : Alloy Steel
Material1 : Stainless Steel
Material2 : plastic
Material3 : rubber
Material4 : Metal
Material5 : alloy and copper
MeasurementSystem : metric
MeasurementSystem1 : metric
MeasurementSystem2 : inch
ModelName : TX-Star Key
ModelNumber : 33632
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
OperationMode : Mechanical
PartNumber : DRA33632
ProductDescription :
Item Type: Torsion Wrench Set
Material: Stainless steel
Specifications:
Socket:
Hex Head: 7Pcs
Cross Point: 3Pcs
Hex Head: 3Pcs
Extension Rod: 1/4, Length: Approx. 10cm / 3.9in
72 Teeth Reversible Ratchet. The Wrench Has Two Working Modes: CW and CCW. However, unless otherwise stated, the wrench can only be calibrated CW
Adjust the back knob to adjust the rotation direction, press the raised round knob on the back to release the socket
Torsion wrench torsion 5-25 nm, adjust the torsion, pull down the green ring and hold the handle together to turn, adjust to the corresponding torsion, then release (ccw large torsion, CW small torsion)
The flat bottom knob is used to lock the torsion, locking CCW and unlocking CW
Color: Black

Package List：
7 x Hex Head
3 x Cross Point Head
3 x Hex Head
1 x Torsion Wrench
1 x Extension Rod
1 x Storage Box
1 x User Manual

Note:
1. This torsion wrench is an accurate instrument designed for tightening screws, bolts, and nuts to the required torsion.
2. Do not use as a 'nut breaker', pry bar, hammer, or as a substitute for a regular ratchet wrench.
3. Do not apply torsion exceeding the maximum capacity of the wrench. Load should be applied only on the handle, without using any handle extension bars.
4. Ensure that you set the wrench to the exact torsion units specified for your requirements, as insufficient or excessive torsion can cause severe damage to the equipment you are working on.
5. Do not disassemble the wrench for any reason. High stress internal components may cause serious injury if accidentally released.
6. The wrench should be recalibrated regularly. Calibration of the wrench should be checked at least once a year, after any abnormal handling or overload, or after 5000 cycles.
7. When not in use, adjust the wrench to the lowest reading(excluding preset torsion wrenches and electronic torsion
ProductSiteLaunchDate : 2015-09-23T12:57:48.336Z
Size : T40
StreetDate : 2020-02-27T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700