Cart 2 india

Specification
Brand : KTC
BulletPoint1 : S1 x S2: 12 x 14
BulletPoint2 : D1:18
BulletPoint3 : D2:21
BulletPoint4 : T1:7
BulletPoint5 : T2:8
Color : Silver
ExternallyAssignedProductIdentifier : 4989433315355
FinishType : Powder Coated
FitType : Universal
ItemName : Kyoto Machine Tools (KTC) Nepros Straight Standard Hex Glasses Wrench NM1-1214H
ItemPackageDimensions_Height : 2.1 centimeters
ItemPackageDimensions_Length : 28.8 centimeters
ItemPackageDimensions_Width : 6.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hex-keys
Manufacturer : 京都機械工具(KTC)
Material : Aluminum
MeasurementSystem : Metric
ModelName : YedaHcyz6etg5hmf3
ModelNumber : NM1-1214H
NumberOfItems : 1
OperationMode : Mechanical
PartNumber : NM1-1214H
ProductDescription :
Item Type: Torsion Wrench Set
Material: Stainless steel
Specifications:
Socket:
Hex Head: 7Pcs
Cross Point: 3Pcs
Hex Head: 3Pcs
Extension Rod: 1/4, Length: Approx. 10cm / 3.9in
72 Teeth Reversible Ratchet. The Wrench Has Two Working Modes: CW and CCW. However, unless otherwise stated, the wrench can only be calibrated CW
Adjust the back knob to adjust the rotation direction, press the raised round knob on the back to release the socket
Torsion wrench torsion 5-25 nm, adjust the torsion, pull down the green ring and hold the handle together to turn, adjust to the corresponding torsion, then release (ccw large torsion, CW small torsion)
The flat bottom knob is used to lock the torsion, locking CCW and unlocking CW
Color: Black

Package List：
7 x Hex Head
3 x Cross Point Head
3 x Hex Head
1 x Torsion Wrench
1 x Extension Rod
1 x Storage Box
1 x User Manual

Note:
1. This torsion wrench is an accurate instrument designed for tightening screws, bolts, and nuts to the required torsion.
2. Do not use as a 'nut breaker', pry bar, hammer, or as a substitute for a regular ratchet wrench.
3. Do not apply torsion exceeding the maximum capacity of the wrench. Load should be applied only on the handle, without using any handle extension bars.
4. Ensure that you set the wrench to the exact torsion units specified for your requirements, as insufficient or excessive torsion can cause severe damage to the equipment you are working on.
5. Do not disassemble the wrench for any reason. High stress internal components may cause serious injury if accidentally released.
6. The wrench should be recalibrated regularly. Calibration of the wrench should be checked at least once a year, after any abnormal handling or overload, or after 5000 cycles.
7. When not in use, adjust the wrench to the lowest reading(excluding preset torsion wrenches and electronic torsion
ProductSiteLaunchDate : 2012-08-17T05:48:20.520Z
Size : 12mm×14mm
UnitCount : 1
UnspscCode : 27111700