Cart 2 india

Specification
Brand : DiStat
BulletPoint1 : 500oF heat resistant
BulletPoint2 : ESD-Safe
BulletPoint3 : Feature - The tape has a high temperature resistance of 500F(260C). High temperature PTFE tape creates a smooth, non-stick surface.
BulletPoint4 : Application - Widely used in impulse sealer, high-speed sealing machine, motor, low voltage electrical products, wire and cable insulation protection.
BulletPoint5 : Note - Please clean up the surface before using the PTFE film tape. The adhesive tape chosen should be wider and longer than necessary for broad compatibility.
Color : Amber
CompatibleMaterial : Alloy Steel
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0674023719739
ExternallyAssignedProductIdentifier2 : 674023719739
ExternallyAssignedProductIdentifier3 : 00840178012098
IncludedComponents : Tape
ItemDisplayDimensions_Height : 0.25 inches
ItemDisplayDimensions_Length : 3.75 inches
ItemDisplayDimensions_Width : 3.75 inches
ItemDisplayWeight : 0.06 pounds
ItemName : DiStat High Temperature ESD Dissipative Polyimide Tape (ESD-Safe Kapton Tape) - 500MM Length (1 inch)
ItemPackageDimensions_Height : 7.0104 centimeters
ItemPackageDimensions_Length : 1.8034 centimeters
ItemPackageDimensions_Width : 6.9088 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : high-temperature-tape
Language : spanish
LowerTemperatureRating : -99 degrees_fahrenheit
Manufacturer : Distat
Material : Polytetrafluoroethylene
Material1 : Polyester
Material2 : Silicone
ModelNumber : Pro-950-2.5-3/4x36
NumberOfItems : 10
PackageLevel : unit
PartNumber : 11V1
ProductDescription : Electrical grade Polyimide with pre-cured pressure sensitive silicone adhesive film is designed to operate at elevated temperatures higher than polyester. This heat-stabilized film surpasses the dimensional stability of polyester. Ideal for wave soldering, insulating circuit boards and where electrostatic discharge is a concern. Has high dielectric strength Highly resistant to heat and chemicals. Puncture and tear resistant at high temperatures. Silicone adhesive protection without leaving any residue Temperature up to 500°F / 260°C Less than <50 volts Removal from Roll Specification Values General Color : Amber Material : Anti-Static Polyimide Film Adhesive: Silicon Film thickness :1 mil or 0.025 mm Total thickness :2.7 mil or 0.062 mm Length: 36 Yards or 500 mm Physical Properties Adhesion to steel: 0.8-0.9 lbs/inch or 0.35-0.4 kg/25mm Tensile strength: 28-32 lbs/inch or 14-16 kg/25mm Elongation at break; (%) ≥ 50 % Electrical Resistivity Static Charge: <50 volts Removal from Roll Dielectric Strength :6-7 KV Temperature Resistance Temperature: 500°F / 260°C Resistance to: acids, oils, solvents
ProductSiteLaunchDate : 2021-09-18T03:00:48.835Z
RecommendedUsesForProduct : Electrical
Size : 1 inch
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Various
TensileStrength : 24 pounds_per_inch
UnitCount : 1
UnspscCode : 31201500
UpperTemperatureRating : 500 degrees_fahrenheit
WaterResistanceLevel : waterproof