Cart 2 india

Specification
Brand : METALpro
BulletPoint : Includes C Clip
IncludedComponents : hand tool hole punch
ItemName : 1 Inch Square Punch and Die Set
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-hole-punches
Manufacturer : METALpro
Material : Alloy Steel
ModelNumber : MP Square Punch and Die Set
NumberOfItems : 1
OperationMode : Manual
PartNumber : MP8074
ProductDescription : These square punch and die sets are designed for METALpro Ironworkers. Each set comes with one upper punch and one lower die. The hole size is based on the upper punch. All sets come with our standard 2″ lower die and 1/32″ clearance from punch to the die. We can sell the punch and dies individually out of the set if needed. Other clearances are available if needed. Custom sizes in 1/64″ increments and larger than 1-1/4″ are available. Hole punch size must be equal to or greater than material thickness for best results. *WE RECOMMEND THE PUNCH AND DIE SET THAT YOU ARE USING IS 1/32″ LARGER THAN YOUR BOLT SIZE (EX. 5/16″ carriage bolt would need 11/32″ square punch and die set) *RATED FOR USE IN MILD STEEL
ProductSiteLaunchDate : 2022-09-16T03:17:38.207Z
Style : 1 Inch Square Punch and Die Set
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44101602