Cart 2 india

Specification
Brand : Auniwaig
BulletPoint1 : 【Features】- Overall quenching, high hardness, not easy to break; 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
BulletPoint2 : 【Easy To Use】- Papers should be placed flat when punching; Pay attention to the lubrication of the punch drill; The smaller the pinhole, the slower the speed
BulletPoint3 : 【Application】- Specially used for punching tags, wall calendars, desk calendars, account books, and handbags; Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
BulletPoint4 : 【Notice】- If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use; It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
BulletPoint5 : 【Product details】- Punching dia.: 9mm / 0.35-inch; punching length: 40mm / 1.57-inch; shank dia.: 11mm / 0.43-inch; total length: 75mm / 2.95-inch; It is polished, hardened to 52-55HRC
Color : Black
ExternallyAssignedProductIdentifier1 : 091044646606
ExternallyAssignedProductIdentifier2 : 0091044646606
ExternallyAssignedProductIdentifier3 : 00091044646606
FinishType : Polished
IncludedComponents : Pin Punch
ItemName : Auniwaig 9mm Paper Punch Drill, Straight Shank Hollow Bit Tool for Hole Puncher Punching Machine 1pcs
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-hole-punches
Manufacturer : Auniwaig
Material : Leather
MeasurementSystem : Metric
ModelName : Pin Punch
ModelNumber : bd3e55a891857f213553a19349c47c
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
OperationMode : Manual
PartNumber : CU5000Z2402HF-FBA
ProductDescription : Auniwaig Paper Punch Drill

Specification:
Feature: Straight Shank
Material:Steel
Main Color:Silver + Black
Punching Diameter: 9mm / 0.35-inch
Punching Length: 40mm / 1.57-inch
Shank Diameter: 11mm / 0.43-inch
Total Length: 75mm / 2.95-inch
HRC :52-55

Description:
1.When drilling, the drilled holes must not be repeated again. Otherwise, the drilled holes cannot be rounded, and the inside of the drilled holes will be blocked by paper scraps.
2.Reasons for the blockage of punch drills: Papers are not tidy and uneven; gaskets are not put in right place or lubrication are not enough etc.; punched papers cannot be punched repeatedly; If the drilling size is small, the pressing rod speed should be slower; the drilling time is too long; the thickness of the drilling paper is too thick.
3.Please wear work clothes and protective glasses to prevent the skin and eyes from being injured. Heat is generated during the drilling process. When the product is rotating, it is strictly prohibited to touch it by hand.
4.Straight shank (H): Installed on the machine with screws (need to be screwed). Easy to disassemble.

Package Content:
1pcs x Hollow Paper Drill

Note:
1.Widely used in punching tags, photo albums, wall & desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
2.The stacking thickness of the offset paper should be 80% of the punching thickness, 60% for base paper, 40% or less for grease film or glazing paper. For example: drill bit with 6mm punching diameter and 50mm punching length (thickness). The total thickness of offset paper to be drilled should be 40mm; the master paper or base paper should be 30mm; and the film or glazing paper should be less than 20mm.

ProductSiteLaunchDate : 2021-07-17T07:06:37.896Z
SheetCount : 25
Size : 9mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 44101602