Cart 2 india

Specification
Brand : Hegebeck
BulletPoint : - Measures 5" x 1/2". - Brass Body. - High Carbon Steel Tip. - High tense spring in Body. - Eliminates the need for a hammer to make holes or markings. - Used for punching and marking holes screw holes, Watch bands.
BulletPoint1 : 【Parameter】- Punching Diameter:3mm/1/8inch;Punching Length:25mm/1inch;Shank Punching:11mm/0.43inch;Total Length:70mm/2-3/4inch;Drill Type:Straight Shank;
BulletPoint2 : 【Features】- Overall quenching,high hardness,not easy to break;90-degree inner chamfer opening,good edge sharpness and strength,not easy to block;
BulletPoint3 : 【Easy To Use】- The smaller the pinhole,the slower the speed;Papers should be placed flat when punching;Pay attention to the lubrication of the punch drill;
BulletPoint4 : 【Widely Used】- Specially used for punching tags,wall calendars,desk calendars,account books and handbags;Suitable for ordinary paper,offset paper,coated paper,grease film paper,leather,fabric etc;
BulletPoint5 : 【Product Service】- Please rest assured to buy our products.If you have any dissatisfaction with our products,please contact us in time,we will give you a satisfactory answer;
Color : Blue,White,Green,Pink
CuttingAngleString : 90.0 degrees
ExternallyAssignedProductIdentifier : 4989999993882
ExternallyAssignedProductIdentifier1 : 0797394462780
ExternallyAssignedProductIdentifier2 : 797394462780
GpsrSafetyAttestation : 1
HoleCount : 6
ItemName : Hegebeck Paper Punch Drill Straight Shank Hollow Punch Bit Tool for Drills and Drill Presses 1/8inch 2PCS
ItemPackageDimensions_Height : 1.97 inches
ItemPackageDimensions_Length : 1.97 inches
ItemPackageDimensions_Width : 1.97 inches
ItemPackageQuantity : 2
ItemTypeKeyword : hand-tool-hole-punches
Manufacturer : Hegebeck
Material : Paper
Material1 : Plastic
Material2 : Metal
ModelNumber : GU7800C3001MU-FBA
NumberOfItems : 1
OperationMode : Manual
PartNumber : GU6900Z2301MU-FBA
ProductDescription : Hegebeck Paper Punch Drill
Description:
When drilling,the drilled holes must not be repeated again;Otherwise,the drilled holes cannot be rounded and the inside of the drilled holes will be blocked by paper scraps;
Hollow punch is easy to use by placing gasket hole punch over area that needs a hole and hit back end with a hammer or mallet,creating unique effects on leather with different patterns punchers;
Punched papers cannot be punched repeatedly;If the drilling size is small,the pressing rod speed should be slower,the drilling time is too long,the thickness of the drilling paper is too thick;
Use your electric drill or drill press and this hollow punch set to make smooth and consistent holes in leather or heavy fabric; the hollow punch set can be safely and non-sliply installed in any chuck;

Specifications:
Product Name:Paper Punch Drill
Main Material:High Carbon Steel
Hardness(HRC):52-55
Main Color:Silver,Black
Package Content:2PCS x Paper Punch Drills

Note:The dimensions are measured manually,so the deviations may exists,hope you can understand us and thank you very much;
Because of the punching tool of the sharp pointed gasket cutting machine, please keep it out of the reach of children;The surface should be coated with anti-rust oil to prevent rust,pay attention to safety before use;


ProductSiteLaunchDate : 2021-08-26T01:17:47.513Z
SheetCount : 5
Size : 3mm
SupplierDeclaredDgHzRegulation : other
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation1 : Leather
SurfaceRecommendation2 : Paper
UnitCount : 1
UnspscCode : 44101602