Cart 2 india

Specification
Brand : Q.Max
BulletPoint : Punches
BulletPoint1 : Punches two 1/4" holes in up to 60 sheets of 20 lb. Paper
BulletPoint2 : Plastic paper guide for perfect positioning
BulletPoint3 : Stylish, 2-tone metal design with rubber base to protect work surface
BulletPoint4 : Country of Origin : United States
Color : Black
ExternallyAssignedProductIdentifier : 8800215709567
ExternallyAssignedProductIdentifier1 : 046985090711
ExternallyAssignedProductIdentifier2 : 641438502638
ExternallyAssignedProductIdentifier3 : 809099099908
ExternallyAssignedProductIdentifier4 : 0641438502638
ExternallyAssignedProductIdentifier5 : 0809099099908
ExternallyAssignedProductIdentifier6 : 0046985090711
HoleCount : 2
ItemName : Q.Max Q. Max - Sheet Metal Punch 52mm
ItemPackageDimensions_Height : 15.9 centimeters
ItemPackageDimensions_Length : 7.5 centimeters
ItemPackageDimensions_Width : 11.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-hole-punches
Manufacturer : Q.Max
Material : Metal
ModelNumber : QMA-52M
NumberOfItems : 1
OperationMode : Manual
PartNumber : QMA-52M
ProductDescription :

size. 52.0mm. Key type. Me. 14mm hexagonal wrench

a quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge.

the special design allows even load during cutting and produces a burr free hole that needs no extra finishing.

heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

all punches are sold singly without key, which should be ordered separately.

thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result.

please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they haveponents, in the larger cutters the thread is in the punch and thus there is no die nut.

ProductSiteLaunchDate : 2018-06-19T06:49:23.851Z
SheetCount : 1
Size : Medium (25-99)
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44101602