Cart 2 india

Specification
Brand : Sinm
BulletPoint : With a lock that can be adjusted with strong and weak to hit with the same force. (The looseness will disappear.)
BulletPoint1 : 【How to choose the right punch? 】If the PDMS chip is connected to a steel pipe, the outer diameter of the steel pipe is 0.1-0.2mm larger than the size of the punch
BulletPoint2 : 【What does punch size mean? 】For example, the 0.5mm hole punch marked, this is the outside diameter, which specifically refers to the size of the end of the pipe head after grinding
BulletPoint3 : 【How big are the holes made by the hole puncher? 】The same type of punch, different people operate, or PDMS thickness is not the same, the final size of the hole will be different there is no need to tangled in the size of the hole, according to the connection relationship to choose the size of the punch
BulletPoint4 : Please select the appropriate size. This is very important
BulletPoint5 : 1 Pcs/Package
Color : transparent
ExternallyAssignedProductIdentifier : 9313597971853
ExternallyAssignedProductIdentifier1 : 0840403743575
ExternallyAssignedProductIdentifier2 : 840403743575
IncludedComponents : No
ItemForm : plastic
ItemName : SINM PDMS Chip Hole Puncher, PDMS Chip Hole Rammer, 0.3~3.5mm Microfluidic Experimental Hole Maker, PDM Experimental Accessories (1, 1.2mm), transparent
ItemPackageDimensions_Height : 34.65 inches
ItemPackageDimensions_Length : 18.5 inches
ItemPackageDimensions_Width : 15.75 inches
ItemPackageQuantity : 1
ItemShape : Pen Shape
ItemTypeKeyword : hand-tool-hole-punches
Manufacturer : SINM
Material : Metal
Material1 : plastic
Material2 : metal
ModelName : Auto Center Punch
ModelNumber : APL-L-K
NumberOfItems : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : SINM
ProductDescription : 【How to choose the right punch? 】If the PDMS chip is connected to a steel pipe, the outer diameter of the steel pipe is 0.1-0.2mm larger than the size of the punch 【What does punch size mean? 】For example, the 0.5mm hole punch marked, this is the outside diameter, which specifically refers to the size of the end of the pipe head after grinding 【How big are the holes made by the hole puncher? 】The same type of punch, different people operate, or PDMS thickness is not the same, the final size of the hole will be different there is no need to tangled in the size of the hole, according to the connection relationship to choose the size of the punch
ProductSiteLaunchDate : 2024-01-13T15:07:19.479Z
Size : 1.2mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 44121611