Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Hole Punch Drill: Punching Diameter: 3mm / 0.12", 5mm / 0.2"; Shank Diameter: 11mm / 0.43"; Punching Length: 29mm / 1.14", 39mm / 1.53"; Total Length: 70mm / 2.75", 75mm / 2.95"; Shank Type: Straight Shank (screws required when installing)
BulletPoint2 : Wide Applications: Widely used for punching tags, wall calendars, desk calendars, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc..
BulletPoint3 : Features: It is polished, overall quenching, high hardness (hardened to 52-55HRC), not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block.
BulletPoint4 : Easy to Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. Taper shank (A): Installed on the machine without screws, not easy to disassemble. Straight shank (H): Installed on the machine with screws, easy to disassemble.
BulletPoint5 : Tips: The smaller the pinhole, the slower the speed. If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill.
Color : Black
CuttingAngleString : 90.0 degrees
FinishType : Polished
GpsrSafetyAttestation : 1
HoleCount : 3
IncludedComponents : Square Hydraulic Hole Punch Die
ItemName : uxcell Hole Punch Drill Set, 3mm 5mm Hole Punching Straight Shank Hollow Drill Bits for Paper Tags Calendars Leather Handbags 2pcs
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-hole-punches
Manufacturer : uxcell
Material : Hardened Steel
ModelNumber : f22031800ux0002
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 2
OperationMode : Electric
PartNumber : f22031800ux0002
ProductDescription : Specifications:
Punching Diameter: 3mm / 0.12", 5mm / 0.2"
Shank Diameter: 11mm / 0.43"
Punching Length: 29mm / 1.14", 39mm / 1.53"
Total Length: 70mm / 2.75", 75mm / 2.95"
Shank Type: Straight Shank (screws required when installing)
Material: Hardened Steel; Hardness: HRC52-55; Finish: Polished
Package Included: 1pcs x 3mm Hole Punch Drill, 1pcs x 5mm Hole Punch Drill


Descriptions:Widely used for punching tags, wall calendars, desk calendars, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc..
It is polished, overall quenching, high hardness (hardened to 52-55HRC), not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block.
Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. Taper shank (A): Installed on the machine without screws, not easy to disassemble. Straight shank (H): Installed on the machine with screws, easy to disassemble.
Tips: The smaller the pinhole, the slower the speed. If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill.

ProductSiteLaunchDate : 2023-05-13T08:40:42.145Z
SheetCount : 300
Size : 15mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation1 : Plastic
SurfaceRecommendation10 : Aluminum
SurfaceRecommendation11 : Brass
SurfaceRecommendation2 : Acrylonitrile Butadiene Styrene
SurfaceRecommendation3 : Glass
SurfaceRecommendation4 : Pine
SurfaceRecommendation5 : Nylon
SurfaceRecommendation6 : Stainless Steel
SurfaceRecommendation7 : Metal
SurfaceRecommendation8 : Copper
SurfaceRecommendation9 : Wood
UnitCount : 2
UnspscCode : 44101602