Cart 2 india

Specification
Brand : iMeistek
BulletPoint1 : Size: Hole diameter: 7/20 inch(9mm), Shank diameter: 0.21 inch(5.5mm), Drilling depth: 1.18 inch(30mm), Total length: approx. 1.97 inch(50mm). Package includes 10 pcs diamond hole saw drill bits.
BulletPoint2 : Diamond Coated: The drill bit is designed with diamond coating, which improves the drilling speed, makes the drill bit more sharp and durable, and wear-resistant. The diamond hole saw is made of steel material, not easy to rust.
BulletPoint3 : Side Hole Design: The side open can remove the waste, debris can be quickly removed when opening the hole, keeping the drill bit clean, and dissipating heat.
BulletPoint4 : Widely Used: The diamond coated drills are perfect for drilling glass, tiles, ceramics, porcelain, slate, marble, limestone, etc, removes a complete circle.
BulletPoint5 : Tips: When the glass drill bit is working on the glass or tiles, please use lubrication (water) and drill slowly, which will extend drill bit life.
BulletPoint6 : For use on ceramic, porcelain, granite, slate, marble, glass, fiber cement board, laminates and more
BulletPoint7 : Made in the USA
Color : Porcelain Drill Bit
CuttingAngleString : 45.0 degrees
ExternallyAssignedProductIdentifier1 : 642380602766
ExternallyAssignedProductIdentifier2 : 0642380602766
FinishType : Diamond
IncludedComponents : 3 Diamond Edge Hole Saws
ItemName : iMeistek 10PCS 7/20 inch Diamond Drill Bit Set, Steel Diamond Coated Hole Saw Drill Bits Kit for Glass, Marble, Granite Ceramic, Tile, Porcelain
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemTypeKeyword : hole-saw-sets
Manufacturer : iMeistek
Material : Alloy Steel
ModelNumber : MTNS0014
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 10
PackageLevel : unit
PartNumber : 94
ProductDescription :

Specification:

Hole Diameter: 7/20 inch(9mm)

Shank Diameter: 0.21 inch(5.5mm)

Drilling Depth: 1.18 inch(30mm)

Total length: 1.97 inch(50mm)

Material: Steel

How to use the drill bits to drill holes in the glass?

Step 1:The bit on the glass 45 degree, drilling a half-moon notch on it.

Step 2:Slowly up the bit to 60 degrees, and then gently drill.

Step 3:Reached 90 degrees, continue to drill.

Step 4:Drill through the glass finally.

 

Package Include:

10 Pcs Diamond Hole Saw Drill Bit

 

Attentions:

1.This glass hole saw needs to be used at a low speed, about 800-1000RPM.

2.In order to prolong the life of this hole saw, please add coolant liquids or water when processing.

ProductSiteLaunchDate : 2022-01-17T02:00:30.346Z
Size : 7/20"(9mm)
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Ceramic,Porcelain
SurfaceRecommendation1 : Tile
SurfaceRecommendation2 : Cer
SurfaceRecommendation3 : Glass
SurfaceRecommendation4 : Porcelain
UnitCount : 1
UnspscCode : 27111700